About re-pairing:
In the case of replacing the transmitting or receiving device, it
is necessary to re-pair, the pairing operation is as follows:
Transmitter operation:
1. Press and hold the power button for 5 seconds in the off state.
When the power indicator flashes once, then quickly press the
transmitter once and see the power indicator flashes to enter the
pairing mode.
2. Receiver operation: After the transmitter enters the pairing
mode, turn on the receiver, wait 2 seconds, then press the
transmitter button to complete the frequency. At this point, you
can speak the microphone to the audition. When you speak, the
reception opportunity flashes red.
3. Exit pairing: short press the transmitter power button to
automatically lock the frequency and complete the pairing.
Products Features: