Changsha Power Electric Co.,Ltd. |
Verified Suppliers
|
|
Professional F Neck Ansi 57-3 Line Post Porcelain Insulators / Used
For U.S.
Description:
Line post porcelain insulators shall conform in all respects to the
requirements of ANSI standard. The insulators shall be made of good commercial-grade
wet-process porcelain.The entire surface of the insulator, with the exception of a firing
surface, shall be glazed. If gray is required, it shall be in
accordance with ANSI Z55.1-1967 (R1973). Metal parts shall be made of a good commercial grade of malleable
iron, ductile iron, steel, or aluminum. Ferrous parts, other than
stainless steel, shall be galvanized in accordance with ASTM A153.
Specifications:
Technical Data Sheet | ||||||||
ANSI CLASS | Creepage distance (mm) | Dry arcing distance (mm) | cantilever strength (kN) | Lower frequency flashover voltage(kV) | Critical impulse flashover voltage(kV) | Test voltage to ground (kV) | ||
Dry | Wet | Positive | Negative | |||||
57-33 | 737 | 311 | 12.5 | 125 | 95 | 200 | 260 | 30 |
Applications:
ANSI 57-2S Line post insulators are designed to provide rigid
support of conducting cable while offering the maximum resistance
to damage from electrical or mechanical events. Horizontal and gain-base line post insulators are often used in
applications to avoid the need to install a cross-arm on the
pole.
Features:
Our porcelain insulators are manufactured using a wet porcelain
process and cured in an environmentally controlled production
facility to ensure a complete and even cure of the porcelain while
also resulting in the highest quality surface finish.
Pre-sales service:
Choose the proper reactor type
Installation recommendations and to provide technical information
Satisfied users of the special design requirements
After-sales service:
Offer professional equipment installation instructing
Provide spare parts for wearing parts(such as post insulator, bolt, etc.)