Brown Glazed 88kg Height 1700mm Lightning Arrester Insulator

Strong environmental adaptability Lightning Arrester Insulator C6-750

Description:

1. Our insulators have externally attached caps and bases. A highly engineered cementing system transfers the load uniformly from the hardware into the porcelain body.

2. Each insulator body is made from the highest quality clay raw materials that have been processed to be fully vitrified porcelain. The body is glazed to add strength to improve surface appearance, and enhance clean-ability.

3. Either chocolate brown or Munsell gray glaze is available. caps and flanges are ferrous, hot dip galvanized. thread holes are proper tapped.

Specifications:

Model	C6-750
Creepage Distance(mm)	4250
Failure load (kN)	Bending strength	6
	Trosional strength	3
Main Dimensions (mm)	H	1700
	φD	208
	a1	4-φ18
	Φd1	121
	a2	4-φ18
	Φd2	121
Lightning Impulse Withstand Voltage(kV)	750
Power Frequency Wet Withstand Voltage(kV)	325

Technical requirements:

1. Glaze: Brown
2. Creepage distance: 4250mm   Length: 1700mm

3. Weight: 88.0kgs

4. Flange material: Aluminum alloy or stainless steel

4. Package type: Wooden case

Application:

Ceramic pillar insulators are used for insulation and support of live parts in outdoor power plants, distribution devices and electrical equipment of power frequency AC substations.

Competitive advantages:

Reasonable insulation structure high reliability of inter-turn insulation.

Small volume light weight

Stainless steel flange low magnetic inductivity high resistivity.

Convenient transportation and flexible installation.

Low loss

Low temperature rise

High mechanical strength, strong weather ability.

Outstanding crack resistance.

Low thermal expansion coefficient