Active Member
|
[China]
Address: 8F., No. 96, Sec. 3, Zhongxiao E. Rd., Da’an Dist., Taipei City 106, Taiwan
Contact name:
Kasmac Industries Co., Ltd. |
|
|
200 Full Automatic Plastic Blow Moulding Machine Energy Saving With PLC Control
Descriptions :
Model 200A suitable for PE material blowing. Adopt diagonal double pull rod center mode-locked, and the extruder system set hard gear reducer and import inverter. The hydraulic valve is imported, seal parts proportional control. Import PLC, human made machine and automatic temperature control model. Also offer Japan MOOG parison controller for matching.
| Main Technical Parameters | |
| Specifications | 200 Series |
| Material | PE |
| Max. Container Capacity (L) | 120 |
| Dimension (LxWxH) (m) | 9.5x4.1x6.5 |
| Weight (T) | 36 |
| Clamping System | |
| Clamping Force (kn) | 800 |
| Platen Opening Stroke (mm) | 800-1700 |
| Platen Size (mm) | 1200x1300 |
| Max Mould Size (mm) | 950x1600 |
| Min Mould Thickness (mm) | 820 |
| Hydraulic And Penumatic System | |
| Motor Power Of Oil Pump (kw) | 28 |
| Air Pressure (Mpa) | 1 |
| Air Consumption (㎥ /m) | 3 |
| Total Power (kw) | 239 |
| Average Energy Consumption (kw) | 143 |
| Extruder System | |
| Screw Diameter (mm) | 120 |
| L/D | 30 |
| Plasticing Capacity (kg) | 240 |
| Number Of Heating Zone | 6 |
| Extruder Heating Power (kw) | 47.4 |
| Extruder Driving Power (kw) | 132 |
| Die-Head | |
| Number Of Heating Zone | 6 |
| Power Of Die Heating (kw) | 38 |
| Max Die Pin Diameter (mm) | 400 |
| Max. Dir Capacity (L) | 20 |
