Active Member
|
[China]
Address: Room C1307 , No. 12 Mingzhi Road, Nanjing, Jiangsu 210012, China
Contact name:Judy Yang
Nanjing Powder New Material Co., Ltd. |
|
|
RAL 1013 Oyster white polyester electrostatic spray powder paint coating company
The Different Types of Powder Coatings
Whether you’re new to powder coatings or an experienced pro, you’re probably well aware that powder coating is a fantastic painting method that creates a tough, durable and beautiful finish. No matter whether you’re using a single gun and small oven or a large fully automated line, the process is basically the same. A powder spray gun is used, which when triggered gives an electrostatic charge to the powder particles passing through it. As the parts to be coated are grounded, the powder is attracted towards the part via the electrostatic process. Once the powder is applied the parts are cured in an oven, which melts and cross-links the powder over the surface of the part and creates a tough, scratch resistant and beautiful finish.
SPECIFICATION:
| Main Material | Polyester resin,barium sulfate,titanium dioxide |
| Surface Type | Gloss,matte,wrinkle,sand grain,antique, Hammer,crocodile skin, wood effect,candy,chrome,transparent,semitransparent,metallic,and special pattern |
| Powder Properties | Specific gravity : 1.3 - 1.75 (depend on colors) |
| Average particle size : 35 - 45um | |
| Coating Properties | Film thickness(ISO 2178) :60 - 90 μm |
| Coverage:15㎡ based on 60μm | |
| Pencil hardness: ASTM D3363,H-2H | |
| Adhesion :GB/T 9286-1998,0 grade | |
| Bending test:GB/T 6742 ,=<2mm | |
| Cupping test:GB/T 9753,>=7mm | |
| Direct and reverse impact (ASTM D2794) : > 50kg.cm | |
| Salt spray Resistance ( ASTM B117, 1000hrs)(Maximum undercutting ,1 mm ): No blistering or loss of adhesion | |
| Heat and moisture test GB/T 1740,>=1000 hours,no change | |
| Application Schedule | Applied by : Electrostatic spraying devices |
| Curing schedule :10 minutes at 200 ℃ | |
| Advantage | Good adhesion,anti-corrosion,UV resistant, strong coating film, |
| Accurate colors, good leveling | |
| Shelf Life | 12 months
|
Purchase Note:
1.M.O.Q :
The minimum order is 500kg ,each color ≥ 100kg
2.Colors:
RAL color :we usually use RAL colors that is widely used in paint industry and easily find in market
Custom color : Color matching is available , if you have colors model ,please send to us for matching .
3.Prices:
Prices depend on the colors and using environment ,for prices please tell us the colors and using environment (indoor use or outdoor use).
4.Time of delivery :
Production will take about 5-8 days after receipt of prepayment,this is subject to the quantity .
5.Payment :
30% T/T prepayment , 70% T/T before shipment (or against BL) or LC at sight .
6.Samples:
1kg powder sample is available for each color for your testing.
Sample is free of cost,but if you pay for the air freight we will
highly appreciate.
Powder Application Systems
In addition to spray application with electrostatic guns, powder
coating materials can be applied by a dip method called fluidized
bed. Fluidized-bed powder coating was developed by Edwin Gemmer for
application of thermoplastic resins and patented in 1953.
In fluidized-bed coating, parts are preheated to 450–500°F and then dipped into a tank filled with powder material that has been “fluidized” by addition of compressed air through a porous membrane at the bottom of the tank. In some cases, the powder is electrostatically charged.
Another option is flame-spray application. In flame-spray, which is used to apply thermoplastic powder materials, powder is propelled through the flame in a heat gun using compressed air. The heat of the flame melts the powder, eliminating the need for ovens.
Yet another method of application is called hot flocking. In this process, the part to be coated is preheated so that the sprayed powder will gel when it comes in contact with the hot part surface. Hot flocking is often used for functional epoxy applications because it builds a thick film that will provide exceptional performance. These fusion-bond epoxy (FBE) products are often used to coat valves and pipe used in extreme conditions such as oilfield or offshore applications.
