|
[China]
Trade Verify
Address: Room 1920, Building 3, Excellence Century Center, Shibei District, Qingdao, Shandong, China
Contact name:Tom
Qingdao Henger Shipping Supply Co., Ltd |
|
Verified Suppliers
|
|
|
Advantage Features: floating pneumatic rubber fenders can be easily handled and installed with guy-rope or guy-chain due to its light weight. It can resist the shearing force and maintain energy absorption level under inclined compressionup to 15 degrees. Meanwhile, provide the low and comparatively even hull pressure.
Construction Features: pneumatic rubber fenders is constructed of inner rubber layer, reinforced synthetic tire cord rubber layers, outer rubber layers. Inner rubber layer is made of pure rubber to seal pressurized air inside. Synthetic tire cord rubber layers are type middle reinforced synthetic tire cord layers with rubber dipped. Outer rubber layer is much more thicker than inner layer that is the coating and skin of whole pneumatic rubber fender.
Features:
1. Large compression deformation, low reaction force, high energy absorption
2. Good floating performance, can meet the needs of the water level change
3. With compressed air as medium, the collision energy consumption by compressed air power
4. Easy installation and long service life
Specification:
Specification D×L m | Initial pneumatic pressure 0.05Mpa | Initial pneumatic pressure 0.08Mpa | ||||
| Sphere Weight(KG) | R(KN) | GEA(KJ) | Sphere Weight(KG) | R(KN) | GEA(KJ) | |
| 0.5×1.0 | 25 | 64 | 6 | 25 | 85 | 8 |
| 0.6×1.0 | 32 | 74 | 8 | 32 | 98 | 11 |
| 0.7×1.5 | 50 | 137 | 17 | 50 | 180 | 24 |
| 1.0×1.5 | 80 | 182 | 32 | 80 | 239 | 45 |
| 1.0×2.0 | 100 | 257 | 45 | 125 | 338 | 63 |
| 1.2×2.0 | 120 | 297 | 63 | 165 | 390 | 88 |
| 1.35×2.5 | 165 | 427 | 102 | 226 | 561 | 142 |
| 1.5×3.0 | 315 | 579 | 153 | 370 | 761 | 214 |
| 1.7×3.0 | 405 | 639 | 191 | 436 | 840 | 287 |
| 2.0×3.5 | 590 | 875 | 308 | 632 | 1150 | 430 |
| 2.5×4.0 | 1050 | 1381 | 663 | 1110 | 1815 | 925 |
| 2.5×5.5 | 1333 | 2019 | 943 | 1410 | 2653 | 1317 |
| 3.0×5.0 | 1880 | 2000 | 1050 | 2155 | 2709 | 1571 |
| 3.0×6.0 | 2160 | 2488 | 1312 | 2470 | 3292 | 1888 |
| 3.3×4.5 | 2020 | 1884 | 1175 | 2300 | 2476 | 1640 |
| 3.3×6.0 | 2300 | 2783 | 1675 | 2600 | 3652 | 2338 |
| 3.3×6.5 | 2700 | 3015 | 1814 | 3080 | 3961 | 2532 |
| 3.3×10.6 | 4403 | 5257 | 3067 | 5020 | 6907 | 4281 |
| 4.5×9.0 | 6554 | 5747 | 4752 | 7470 | 7551 | 6633 |
| 4.5×12.0 | 8739 | 7984 | 6473 | 9960 | 10490 | 9037 |
Note: The weight and reaction force & Energy absorption tolerance ±10% | ||||||
> Dimensional inspection — shall be inspected at the initial internal pressure. Tolerance: +10%, -5%.
> Air-leakage test — shall be conducted at initial pressure for more than 30 min
> Hydrostatic-pressure test — shall be performed for 10 min at the hydrostatic pressure shown in “test pressure at 0% deflection”. Maximum temporary elongation: 10%
The performance of floating pneumatic rubber fenders shall be specified in terms of Guaranteed Energy Absorption (GEA), Reaction Force at GEA deflection, and Hull Pressure at GEA deflection.
– Pressure Requirement
Ronsen Yokohama t ype pneumatic rubber fennders are classfied in initial pressure and shapes, appearance. According to pressure requirements of ISO 17357, we produce two standard intial pressure for pneumatic rubber fenders, Pneumatic 50, initial internal pressure 50 kPa ( called P50 ) and Pneumatic 80, initial pressure 80 kPa ( called P80 ).
– Fenders Type
There are many choices for protective jacket of inflatable rubber fender, Henger could also provide OEM
service and technical design based on customer requirement and actual demand. contact our sales service for more details.
Qingdao Henger Shipping Supplies Co., Ltd
Lies in Qingdao, a beautiful coastal city with red tiling and green trees, blue sea and clear sky, Qingdao Henger Shipping Supplies Co., Ltd is a high-tech enterprise integrated with manufacturing, research and innovation, technical services, specialized in manufacturing marine products, such as marine rubber fender, marine airbag, navigation mark and marine buoy. All products get ISO 9001-2008 certificate and IACS quality authentication from CCS, BV, GL, ABS, LG, etc.
With strong technology base, advanced manufacturing technique, complete manufacturing facilities and well-equipped checkout equipment, Qingdao Henger Marine Supplies Co., Ltd is devoted to forge itself into a top-ranking international competitive marine products manufacturer providing high quality products and perfect service for all customers, and shoulder the responsibility of ensuring global marine safety via mutually beneficial cooperation with friends all over the world.
