Qingdao Jiexing Marine Equipment Co., Ltd. Qingdao Beierte Marine Technology Co., Ltd |
|
Explosion-Proof Pneumatic Rubber Fender 80KPa
Marine pneumatic fender size range:
Diameter: 0.5m-3.5m, length: 0.5m-9.5m
Pneumatic rubber fender performance
SIZE | Initial pressure is 80 kPa Compression deformation 60% | ||
Diameter(mm) | Length (mm) | Reactionforce-kn | Energyabsorb kn-m |
500 | 1000 | 87 | 9 |
600 | 1000 | 100 | 10 |
700 | 1500 | 182 | 28 |
1000 | 1500 | 241 | 40 |
1000 | 2000 | 340 | 54 |
1200 | 2000 | 392 | 69 |
1350 | 2500 | 563 | 100 |
1500 | 3000 | 763 | 174 |
1700 | 3000 | 842 | 192 |
2000 | 3500 | 1152 | 334 |
2000 | 4000 | 1591 | 386 |
2500 | 4000 | 1817 | 700 |
2500 | 5500 | 2655 | 882 |
3000 | 5000 | 2715 | 1080 |
3000 | 6000 | 3107 | 1311 |
3300 | 4500 | 2478 | 1642 |
3300 | 6000 | 3654 | 2340 |
3300 | 6500 | 3963 | 2534 |
What matters should be paid attention to in the selection of pneumatic rubber fender:
1. First, dock according to the tonnage, ship type and working environment of the ship;
2, the choice of pneumatic rubber fender should also take into account the ship lifting derrick tonnage, the maximum arm length; Because the weight and diameter of the pneumatic rubber fender cannot be higher than the tonnage of the ship's derrick and the maximum boom length.
3. Pneumatic rubber fender is divided into jacket-type and portable, depending on what kind of ship's operating environment is suitable for the ship's fender.
4. According to the different diameter of pneumatic rubber fender, the number of cord layers selected is also different.
If you are not sure of the above notes, you can also leave a message to our company and inform us of the basic data and requirements of the ship. The technical department will recommend the fender suitable for you according to your requirements.
The inflatable rubber fender mainly uses the compression of air as the medium, which can float on the sea and absorb the impact energy of ships, so that the ships can dock smoothly and safely between two ships or ships near the wharf and other docking buildings, so as to achieve the effect of collision prevention and avoidance, so it is widely used in the transfer and docking operations between ships and ships.
Pneumatic rubber fender features:
1, large energy absorption, small reaction force, so as to ensure that neither damage the hull nor damage the shore wall.
2, simple installation, portable, in any ship, any sea area is not affected by the tide and the size of the ship.
3. Good resilience, the product will not be deformed due to the force after the force is exerted. After the fender is squeezed, more than 95% of the product will be released immediately after the force.
4, good economic performance, compared with the fender, belt fender economic performance is good, cost-effective, reliable quality. Beierte Fender has undergone inspection from raw material purchasing, product ordering, product production and product inspection to ensure its quality.
Pneumatic rubber fender pressure testing
Pneumatic rubber fender picture