Qingdao Jiexing Marine Equipment Co., Ltd. Qingdao Beierte Marine Technology Co., Ltd |
|
Inflatable Rubber Fender Refrigerated Transport Ship Equipment
Pneumatic rubber fender mainly uses the compression of air as the medium, which can float on the sea and absorb the impact energy of ships, so that the two ships or ships near the wharf and other docking buildings can be smoothly and safely docked, so as to achieve the effect of collision prevention and avoidance, so it is widely used in the transfer and docking operations between ships and ships.
Yokohama fenders common word performance
SIZE | Initial pressure is 80 kPa Compression deformation 60% | ||
Diameter(mm) | Length (mm) | Reactionforce-kn | Energyabsorb kn-m |
500 | 1000 | 87 | 9 |
600 | 1000 | 100 | 10 |
700 | 1500 | 182 | 28 |
1000 | 1500 | 241 | 40 |
1000 | 2000 | 340 | 54 |
1200 | 2000 | 392 | 69 |
1350 | 2500 | 563 | 100 |
1500 | 3000 | 763 | 174 |
1700 | 3000 | 842 | 192 |
2000 | 3500 | 1152 | 334 |
2000 | 4000 | 1591 | 386 |
2500 | 4000 | 1817 | 700 |
2500 | 5500 | 2655 | 882 |
3000 | 5000 | 2715 | 1080 |
3000 | 6000 | 3107 | 1311 |
3300 | 4500 | 2478 | 1642 |
3300 | 6000 | 3654 | 2340 |
3300 | 6500 | 3963 | 2534 |
Pneumatic rubber fender features:
1, large energy absorption, small reaction force, so as to ensure that neither damage the hull nor damage the shore wall.
2, simple installation, portable, in any ship, any sea area is not affected by the tide and the size of the ship.
3. Good resilience, the product will not be deformed due to the force after the force is exerted. After the fender is squeezed, more than 95% of the product will be released immediately after the force.
4, good economic performance, compared with the fender, belt fender economic performance is good, cost-effective, reliable quality. Beierte inflatable fenders undergoes multiple levels of inspection to ensure its quality from raw material procurement, product ordering, product production and product inspection to delivery.
Pneumatic rubber fenders structure diagram
Pneumatic rubbers fender compression test
What matters should be paid attention to in the selection of pneumatic rubber fenders:
1. First, dock according to the tonnage, ship type and working environment of the ship;
2, the choice of pneumatic rubber fender should also take into account the ship lifting derrick tonnage, the maximum arm length; Because of the pneumatic rubber fender,
The weight and diameter of the derrick should not be higher than the tonnage and maximum boom length of the ship.
3. Pneumatic rubber fender is divided into jacket-type and portable, depending on what kind of ship's operating environment is suitable for the ship's fender.
4. According to the different diameter of pneumatic rubber fender, the number of cord layers selected is also different.
Pneumatic rubber fender picture