|
[China]
Trade Verify
Address: E 18Floor Fazhan Build No.13 Easy Huayuan Road Chancheng Area Foshan City.
Contact name:ALLSON
BOGEN PUMPS |
|
Verified Suppliers
|
|
|
Customized Compressed Air Diaphragm Pump , Chemical Diaphragm Pump
Compressed Air Diaphragm Pump Introduction
Compressed Air Diaphragm Pump were designed to resolve numerous problems that pumpers’ face on a job site. Whether you have limited space, are moving fluids with mixed solids or compositions, or require a safe priming pump system for your job, our AOD pumps provide a portable solution to get the job done.
Operating through a dual-diaphragm fluid chamber, positive displacement creates an air vacuum, initiating quick priming with minimal effort. Once primed, air operated diaphragm pumps are capable of passing up to 1-¼ inch solids (up to 90% solid composition) and highly viscous fluids with ratings exceeding 25,000 cPs. AOD Pumps’ fluid handling, portability and durability make them a versatile pump for any job application.
Compressed Air Diaphragm Pump Application
Large solid particle transmission
Abrasive medium
dangerous and flammable liquid
Clean room liquid
Compressed Air Diaphragm Pump Parameters
| Description | Unit | Reference Figure |
| Maximum air inlet pressure | Mpa | 0.83 |
| Maximum flow rate | L/Min | 903 |
| Maximum lift | M | 70 |
| Maximum outlet pressure | Mpa | 0.83 |
| Maximum particle size | mm | 9 |
| Weight | kg | 103 |
| Noise level | db | ＜70 |
Compressed Air Diaphragm Pump Delivery
A 40 X X - X X X - X (model selection)
Form of pipe mouth:A-BSP B-NPT(F) C-Flange
Diaphragm material:9 – Santoprene H – Hytrel T -
PTFE/Santoprene
Ball material:9 -Santoprene H – Hytre T – PTFE A -
Acetal
Ball seat material:P/K –Polypropylene/Kynoar SS –Stainless
Steel
Pump material: SS –Stainless Steel AL –Aluminum Alloy
CI- Carbon Steel P/K –Polypropylene/Kynoar
Maximum Applied Temperature Limits (diaphragm / ball / seal
material)
Acetal ···············································40°-
150°F
(4.4- 65.5°C)
Santoprene·········································-40°- 225°F
(-40°- 107.2°C)
················································40°- 220°F (4.4°-
104°C)
Nitrile················································10°- 180°F
(-12°- 82°C)
Viton·················································-40°- 350°F
(-40°-176.6°C)
Hytrel·················································-20°-150°F
(-12°- 93°C)
Kynar·················································10°-200°F
(-28.9°- 65.5°C)
Polypropylene·······································32°- 175°F
(0-79.4°C)
1.5" Flow diagram
