|
[China]
Trade Verify
Address: 608, Building B, Yinyi Duhui Guoji, No.8, Lane 559, Youngor Avenue, Haishu District, Ningbo, China
Contact name:Brandon Bao
Ningbo Brando Hardware Co., Ltd |
|
Verified Suppliers
|
|
|
SCG353A051 SCDU353A051 2-1/2'' Diaphragm Valve 24 / DC
Working principle of 353 series dust collector valves:
The two chambers of the dust collector valves are connected
together through an air passage (smaller in diameter than the pilot
valve orifice when so equipped). When the orifice is opened, the
air in the upper chamber is exhausted, at a much faster rate than
the speed of which air enters through the air passage, therfore the
air pressure in the upper chamber drops significantly. As this
occurs, the higher air pressure in the lower chamber pushes the
diaphragm up allowing a large volume of air through to the bottom
chamber and its outlet connected to the dust collector bags. This
sudden burst of air inflates the filter bags or "pops" the filter
bags so as to shake loose accumulated material on the outside of
each filter bag. When the orifice closes, the pressure in the upper
and lower chambers equalize and the diaphragm returns to its
original position, aided by the force of a return spring. The dust
collector valves are important components to keep dust collector
systems operating efficiently and effectively.
Technical Data of ASCO Pulse Jet Valve:
Model No | SCG353A043 | SCG353A044 | SCG353A047 | SCG353A050 | SCG353A051 |
Port Size | G3/4'' | G1'' | G1-1/2'' | G2'' | G2-1/2'' |
Nominal Size | φ20mm | φ25mm | φ40mm | φ50mm | φ62mm |
Working Pressure | 0.3 to 0.8MPa | ||||
Environment Temperature | -5 to +55℃ | ||||
Relative Humidity | ≤85% | ||||
Operating Medium | Dry clean compressed air | ||||
Service Life | Over one million times | ||||
Voltages | AC24V, AC110V, AC220V, DC24V | ||||
ASCO Type Solenoid Pulse Jet Valve:
Model No. | BB14040007 |
Ref No. | 400425 |
Voltage | AC24V, AC110V, AC220V, DC12V, DC24V |
Connection | DIN 43650A |
Other can be customized, please contact us. | |
Model No. | BAPC214041405 |
Ref No. | C113827 |
NC/NO | NC |
2 Way or 3 Way | 2Way |
Other can be customized, please contact us. | |
Model No. | A051 |
Ref No. | C113685 |
Replace For | SCG353A051 |
Mounting Hole Dia. | 8.5mm |
Sealing Disc OD | / |
Ref. Number | SCG353A050 |
Working Pressure | 0.3~0.8Mpa |
Voltage | 24V DC, 110V AC, 220V AC Other voltages can be customized. |
Diaphragm Nos | 2 |
Port Size | G2'' |
Other requirement please contact. | |
353 Series Pulse Jet Valve For Dust Collector System:
Focus on your demands, Offer you best solution:
√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing
Welcome to your any question and inquiry!
