|
[China]
Trade Verify
Address: 608, Building B, Yinyi Duhui Guoji, No.8, Lane 559, Youngor Avenue, Haishu District, Ningbo, China
Contact name:Brandon Bao
Ningbo Brando Hardware Co., Ltd |
|
Verified Suppliers
|
|
|
SPU225A-08 Shako Type 1'' Stainless Steel Solenoid Valve 24V 110V 220V
The SPU225A is a 2/2-way (2 port / 2 positions) normally closed solenoid valve designed to stay closed until electrical power is applied. When power is applied the coil is magnetised which in turn lifts the armature revealing a small pilot hole which allows the pressure above the diaphragm to vent downstream so that the inlet pressure is able to fully lift the diaphragm allowing full flow through the valve. When the power is removed, the armature drops back over the pilot hole, pressure increases above the diaphragm and the valve fully closes again within 20 to 50 milliseconds.
Main Dimension of SPU225A series Solenoid Valve:
Technical Data of SPU225A series Solenoid Valve:
Ordering Code of SPU225A series Solenoid Valve:
Brando Solenoid Valve Factory Production Video:
More Shako Type Solenoid Valves for you to choose:
 |  |
| PU220A Series | PU225A Series |
 |  |
| SPU225A Series | PU225S Series |
Focus on your demands, Offer you best solution:
√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing
Welcome to your any question and inquiry!
