Ningbo Brando Hardware Co., Ltd |
Verified Suppliers
|
|
4HV330-08 Airtac Type Hand Lever Operated Directional Valve 4/3 Way
Installation & Usage of 4HV series Hand Lever Valve:
1. Before installing, be sure the valve hasn’t been damaged via transportation.
2. It’s suggested to use the medium lubricated by 40μm filter element. Be aware of the flow direction and port size.
3. Please notice whether the installation condition accords with technical requirements (such as “working pressure” and “scope of application temperature”), then the equipment can be installed and used.
4. Take measure to avoid vibration and frozen.
5. Before using the fittings and tubes make sure they are clean. When connecting to fittings, be sure the PTFE Thread seal tape is used correctly.
6. To keep the dust away, Never forget to install dirt-proof boot in air intake and outlet during dismounting.
Technical Data of 4HV series Hand Lever Valve:
Model | 4HV2□□-06(L) | 4HV2□□-08(L) | 4HV3□□-08(L) | 4HV3□□-10(L) | 4HV4□□-15(L) | 4HV4□□-20(L) |
Fluid | Air (to be filtered by 40μm filter element) | |||||
Operating | Manual control direct acting type | |||||
Port Size | 1/8'' | 1/4'' | 1/4'' | 3/8'' | 1/2'' | 3/4'' |
Orifice Size (Cv) | 14.0mm² (Cv=0.78) | 16.0mm² (Cv=0.89) | 30.0mm² (Cv=1.67) | 33.0mm² (Cv=1.83) | 88.0mm² (Cv=4.89) | 95.0mm² (Cv=5.27) |
Valve Type | 4/2 way, 4/3 way | |||||
Pressure Range | 0 to 1.0 MPa (0 to 145 psi) | |||||
Proof Pressure | 1.5 MPa (215 psi) | |||||
Temperature | -20 to +70℃ | |||||
Body Material | Aluminum Alloy | |||||
Operating Angle | 90° (4/3 Way: 45°) |
Ordering Code of 4HV series Hand Lever Valve:
Dimension of 4HV series Hand Lever Valve:
Production Video of BRANDO Pneumatic Valves:
More Pneumatic Products for you to choose:
2/2 Way Pneumatic Valves | 3/2 Way Pneumatic Valves | 5/2 Way Pneumatic Valves | 5/3 Way Pneumatic Valves |
Namur Solenoid Valves | FRL Unit | Pneumatic Cylinders | Silencers and Fittings |
![]() | ![]() | ![]() ![]() |
Focus on your demands, Offer you best solution:
√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing
Welcome to your any question and inquiry!