|
[China]
Trade Verify
Address: 608, Building B, Yinyi Duhui Guoji, No.8, Lane 559, Youngor Avenue, Haishu District, Ningbo, China
Contact name:Brandon Bao
Ningbo Brando Hardware Co., Ltd |
|
Verified Suppliers
|
|
|
24V DC 113-030-0123 113-030-0124 Nass Type 0545 Magnetic Coil
Main dimension of Nass Type 0545 Electronic Drain Solenoid Coils:
Technical parameter of 0545 110-030 NASS Type Solenoid Valve Coil:
| Code No | Voltages | Frequency(Hz) | Power (W) | Power (VA) |
| 113-030-0123 | 24vDC | 4,1 | ||
| 113-030-0144 | 24VAC | 50 | 8,8 | |
| 113-030-0144 | 24VAC | 60 | 7,6 | |
| 113-030-0128 | 220VAC | 50 | 9,0 | |
| 113-030-0128 | 240VAC | 60 | 9,2 | |
| 113-030-0142 | 230VAC | 50 | 8,8 | |
| 113-030-0142 | 230VAC | 60 | 7,6 | |
| 113-030-0121 | 220VAC | 50 | 14,0 | |
| 113-030-0124 | 24VDC | - | 7,9 | |
| 113-030-0135 | 24VAC | 50 | 14,0 | |
| 113-030-0135 | 24VAC | 60 | 12,0 | |
| 113-030-0279 | 110 VAC | 50 | 13,9 | |
| 113-030-0279 | 110VAC | 60 | 12,2 | |
| 113-030-0125 | 24VDC | - | 11,9 | |
| 113-030-0129 | 24VAC | 50 | 21,0 | |
| 113-030-0129 | 24VAC | 60 | 18,0 | |
| 113-030-0126 | 110VAC | 50 | 21,5 | |
| 113-030-0141 | 230 VAC | 50 | 22,0 | |
| 113-030-0141 | 230VAC | 60 | 19,0 | |
| 113-030-0120 | 12VDC | - | 17,5 | |
| 113-030-0127 | 24VAC | 50 | 25,0 | |
| 113-030-0132 | 24VDC | - | 18,5 | |
| 113-030-0120 | 36VAC | 50 | 25,0 | |
| 113-030-0137 | 110VAC | 50 | 27,5 | |
| 113-030-0140 | 110VAC | 60 | 26,5 | |
| 113-030-0137 | 120VAC | 60 | 28,0 | |
| 113-030-0133 | 220VAC | 50 | 25,5 | |
| 113-030-0122 | 220VAC | 50 | 22,0 | |
| 113-030-0138 | 230VAC | 50 | 25,5 | |
| 113-030-0133 | 240VAC | 60 | 25,0 | |
| 113-030-0138 | 240VAC | 60 | 27,0 |
Phyical map of 113-030-0028 nass type electromagnetic coil:
Applicatoin of nass type 113-030-0035 electric magnetic coil:
More details about 0545 110-030 series Solenoid Coil can be found below the Youtube Video:
How we control solenoid coil quality during production:
1, Inspect raw material of enameled copper wire and thermoplastic or thermosetting plastic by mesure and testing
2, Set up parameters on coil winding machines, then manual inspect one by one after winding
3, After welded electrial terminations then tested by testing machines one by one to ensure all coils is workable
4, After moulded with thermoplastic or thermosetting plastic will be tested 100% again, and also will select 10% by random and assembled with solenoid valve then let it work for testing life.
5, After selected out some failed pneumatic solenoid coil, we will put them with stickers and marked failed reason on paper then destroy to avoid mixed into bulk order goods.
Product Features:
1. Using high quality wire which has UL approved; 2. Using high
quality permeablity magnetic material which contain low carbon;
3. Using high quality housing material like PA66, PBT, PPS, BMC and
so on.
4. Insulation class can be B, F, H, N, C;
5. Protection class can be IP65, IP67 & IP69K;
6. We also offer special coils like ex-proof coils, water proof
coils and so on.
7. If you have special requirement, pls feel free to contact us.
Focus on your demands, Offer you best solution:
√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing
Welcome to your any question and inquiry!
