|
[China]
Trade Verify
Address: 608, Building B, Yinyi Duhui Guoji, No.8, Lane 559, Youngor Avenue, Haishu District, Ningbo, China
Contact name:Brandon Bao
Ningbo Brando Hardware Co., Ltd |
|
Verified Suppliers
|
|
|
K0850 SCG353A043 SCG353A044 Repair Kit Pulse Solenoid Valve Stem
This is ASCO type armature assembly repair kit for SCG353A043, SCG353A044 dust collector solenoid pulse valve. Solenoid valve is a basic element used to switch the fluid path or commutate the fluid; its internal components are precision machined, and different valve body and core materials are selected to meet the circulation of different media. The function is achieved by the lifting or falling of its internal electromagnetic moving iron core, and the action of the moving iron core is completed by the power on or off of the electromagnetic coil.
| Model number | BAPC211037301 |
| Ref numbers | K0850 |
| Type | 2/2 Way |
| Function | Normally Closed (NC) |
| Core tube material | 304 Stainless steel |
| Moving core material | Stainless steel 430FR |
| Sealing material | NBR (Common), VITON (Available) |
| Suitable Coil Hole Diameter | φ11mm |
| Suitable Coil Height | 31mm |
| Inlet orifice max | 6mm |
| Voltage | DC, AC |
| Connection | Threaded |
| Applicable Valve Model | SCG353A043, SCG353A044 |
| Valve | Repair Kits | Coils | ||||
| AC | DC | 24VDC | 24 VAC | 110VAC | 220VAC | |
| SCG353A043 | C113444 | C113444 | 400325642 | 400325101 | 400325118 | 400325118 |
| SCG353A044 | C113444 | C113444 | 400325642 | 400325101 | 400325118 | 400325118 |
| SCG353A052 | C113444 | C113444 | 400325642 | 400325101 | 400325118 | 400325118 |
| SCG353A053 | C113444 | C113444 | 400325642 | 400325101 | 400325118 | 400325118 |
| SCG353A047 | C113827 | C113827 | 400425342 | 400425101 | 400425118 | 400425117 |
| SCG353A050 | C113685 | C113686 | 400425342 | 400425101 | 400425118 | 400425117 |
| SCG353A051 | C113685 | C113686 | 400425342 | 400425101 | 400425118 | 400425117 |
| SCG353A060 | C123432 | C123433 | 400425342 | 400425101 | 400425118 | 400425117 |
| SCG353A065 | C113827 | C113827 | 400425342 | 400425101 | 400425118 | 400425117 |
C113444 K0850 Armature Assembly Application of SCG353A043 SCG353A044 Pulse Valve:
K0850 solenoid armature consist of guide tube , spring, moving core and
seal. Suit for ASCO type solenoid pulse valve SCG353A043
SCG353A044. Which is widely used in dust collector system in
industrial.
The electromagnetic pulse valve is composed of electromagnetic
pilot operator, diaphragm and valve body. Due to difference of
pressure acting on two sides of the diaphragm, the diaphragm is
pressed closely against the outlet of valve to keep the valve stays
in “closed” position.
When energized by an electric signal from the controller, the electromagnetic armature will move to open the discharge opening of back cavity. The compressed air in back cavity bursts out to relief pressure and pressurized air in front cavity pushes up the diaphragm to open the main outlet of valve, then the electromagnetic pulse valve opens and starts to blow.
When the signal disappears and the spring works immediately to send the pilot operator back to its original position and close the discharging opening. The diaphragm will close the passage by the effect of the pressure in the front cavity and the spring. The pulse valve stops blowing.
The orifice in the diaphragm damps the airflow when the armature is lifting up for releasing the pressure. When the discharge hole closed, the pressure gas will fill into the front cavity to close the passage by the diaphragm. The pulse valve stops blowing.
Focus on your demands, Offer you best solution:
√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing
Welcome to your any question and inquiry!
