Ningbo Brando Hardware Co., Ltd |
Verified Suppliers
|
|
3V1-08 3 Way Pneumatic Air Solenoid Valve 1/4'' 12V 24V 110V 220V
Installation instructions
1. Before installing, be sure the valve has not been damaged via
transportation.
2. Its suggested to use the medium lubricated by 40μm filter
element.
3. Be aware of the flow direction and port size.
4. Please notice whether the installation condition accords with
technical requirements (such as voltage, actuation frequency,
working pressure and scope of application temperature), then the
equipment can be installed and used.
5. Take measure to avoid vibration and frozen.
6. Before using the fittings and tubes make sure they are clean.
7. When connecting to fittings, be sure the PTFE Thread Seal Tape
is used correctly.
8. To keep the dust away, please use the silencer for the exhaust
ports.
9. Never forget to install dirt-proof boot in air intake and outlet
during dismounting.
10. After installing, please use the manual override to test valve
first.
Technical Data of 3V1 Series Pneumatic Solenoid Valves:
Model | 3V1-M5 | 3V1-06 | 3V1-08 |
Medium | Air (to be filtered by 40 μ m filter element) | ||
Action | Direct Acting | ||
Way & Position | 3 Port 2 Position | ||
Port Size | M5 | 1/8'' | 1/4'' |
Orifice Size | 1.0mm | ||
Pressure Range | 0 to 0.8MPa | ||
Max. Resistance Pressure | 1.2 MPa | ||
Coil Voltage | 12VDC, 24VDC, 110VAC, 220VAC | ||
Coil Power | AC: 5.5VA, DC: 4.8W | ||
Max. Frequency | 10 cycle/sec |
Dimension of 3V1 Series Pneumatic Solenoid Valve:
Production Video of Pneumatic Solenoid Valves:
More Pneumatic Products for you to choose:
2/2 Way 3/2 Way 5/2 Way, Single Solenoid
5/2 Way, Double Solenoid 5/3 Way, Double Solenoid Pneumatic Hose Fittings
Focus on your demands, Offer you best solution:
√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing
Welcome to your any question and inquiry!