G353A041 Right Angle 3/4'' Inch Remote Pulse Jet Diaphragm Valve

G353A041 Right Angle 3/4'' Inch Remote Pulse Jet Diaphragm Valve

Installation
1. The valves can be mounted in any position without affecting operation
2. Threaded pipe connection is: G = G (ISO 228/1) or compression fittings
3. When connecting piping or tubing to the G1/8 connection in the valve bonnet, the remote ASCO pilot valve should be mounted as close as possible to the main pulse valve. Connection tubing lengths of 3 meter or less have little effect on the pulse response. Installations with over 3 meter of tubing must be tested under actual operating conditions. Tubing with Φ 6 mm O.D. is recommended for all installations
4. For compression fitting types tightness is achieved by the compressed gasket on the blow tube
5. Other pipe threads are available on request
6. Installation/maintenance instructions are included with each valve
7. Spare parts kit and replacement coils are available

Technical Data of ASCO Pulse Jet Valve:

Main Dimension:

353 Series Pulse Jet Valve For Dust Collector System:

Focus on your demands, Offer you best solution:

√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing

Welcome to your any question and inquiry!