|
[China]
Trade Verify
Address: 608, Building B, Yinyi Duhui Guoji, No.8, Lane 559, Youngor Avenue, Haishu District, Ningbo, China
Contact name:Brandon Bao
Ningbo Brando Hardware Co., Ltd |
|
Verified Suppliers
|
|
|
5404-08 Type 1 Inch Pilot Operated Servo-assisted Piston Brass Solenoid Valve
The 5404 valve is a servo-assisted piston valve available in NC and NO versions. A minimum differential pressure is required for the valve switching function. The solenoid coils are moulded with high-quality epoxy resin. In combination with a plug to DIN EN 175301-803 Form A, the valves satisfy degree of protection IP65.
Servo-assisted piston valve with an orifice up to DN50
Explosion proof versions for Cat. 2
Suitable for gas and steam applications up to 160°C
Relief valves for compressors
For selecting the correct product please refer to the technical
data, images and notes for proper use according to the data sheet.
Dimension:
Brando supply:
1. Replacement Solenoid Valve: Pneumatic Solenoid Valve;
Refrigeration Solenoid Valve; Dust Collector Valve; RO Water
Solenoid Valve
2. Repair Kits: Diaphragm(Goyen, ASCO, Mecair, Turbo, AUTEL,
Norgren, Joil, SBFEC); Solenoid Coil; Solenoid Armature
3. Pulse Controller; Pneumatic Fitting; Connector
 |  |  |  |
| 6213 Series | 5404 Series | 6013&6014 | ADK11 Series |
 |  |  |  |
| UniBody Type | Split Type | 0927&0955 Series | 2W&2S Series |
Incorrect use of the solenoid valve Type 5404 can be dangerous to
people, nearby equipment and the environment.
1. The device is designed to control, shut off and meter neutral
media up to a viscosity of 21 mm²/s.
2. In areas at risk of explosion, only use devices approved for use
in those areas. These devices are labeled with a separate Ex type
label. For use in areas at risk of explosion, note the information
provided on the separate Ex type label and the separate
explosion-related operating instructions included in the scope of
supply.
3. Provided the cable plug is connected and installed correctly,
the device satisfies protection class IP65 in accordance with DIN
EN 60529 / IEC 60529.
4. Use according to the permitted data, operating conditions and
conditions of use specified in the contract documents and operating
instructions.
5. Correct transportation, correct storage and installation and
careful use and maintenance are essential for reliable and
problem-free operation.
6. Use the device only as intended.
Focus on your demands, Offer you best solution:
√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing
Welcome to your any question and inquiry!
