10mm Hole 22 Width 29.5 Height EVI 7/10 Pneumatic Solenoid Valve Coil Repair Kit

 10mm Hole 22 Width 29.5 Height EVI 7/10 Pneumatic Solenoid Valve Coil Repair Kit

1. The aperture of EVI 7/10 solenoid valve coil: the size of the solenoid valve coil, the most important aspect is the aperture of the coil, generally speaking, is the thickness of the wire that can pass inside the coil. Therefore, the most basic of such coils with precise dimensions is to have a very suitable size in terms of aperture.

2. Height of EVI 7/10 pneumatic magnetic coil: different sizes of solenoid valve coils will have different sizes, and their different sizes are mainly reflected in the aperture and height of the coil. Therefore, in addition to the accuracy of the aperture, such a coil of precise size requires a very precise size in terms of the height of the coil.

It must be very precise in these two aspects, the solenoid valve coil will have a precise size, which will be more suitable for everyone's application.

Dimension of BB10029502 Solenoid Valve Coil :

Technical Data:

Solenoid Coil Production Line:

Attention:​
1. This air suspension compressor pump solenoid coil is made of high quality components.

2. Replaces the original air compressor solenoid coil of your car and equal the original quality.
3. Please double confirm the compatibility as well as the OEM number before purchasing.
4. Instruction is not included. Professional installation is recommended.

Steps and methods for properly installing a solenoid valve coil:

1. Check if the solenoid valve and the selected parameters are the same, such as differential pressure, etc. If the error occurs, the solenoid valve coil will be burned out. Voltage fluctuations should be within the normal range and meet the rated voltage.

2. Before connecting the pipeline, flush the pipeline and remove the residual dirt in the pipeline. If there are residual stains, it will affect the normal use of the solenoid valve. To prevent this, a filter should be installed in the pipeline.

3. Install the solenoid valve coil of the solenoid valve vertically on the horizontal and ground pipes. If there is a special situation, it cannot be installed vertically. The appropriate solenoid valve should be ordered in advance, otherwise the solenoid valve will not work properly.

4. When installing, add a safety process and install a manual cutting valve to facilitate maintenance in case of failure.

5. Pay attention to the direction when installing, can not be reversed, installed in the direction indicated on the package, and can be reversed in some special cases such as vacuum.

6. If the water may be damaged by the medium, you must take appropriate protective measures or choose a solenoid valve with a waterproof hammer function.

7. The solenoid valve cannot be energized all the time, otherwise it will reduce its life. Note that normally open, normally closed solenoid valves cannot be used with care.

Product Features:
1. Using high quality wire which has UL approved; 2. Using high quality permeablity magnetic material which contain low carbon;
3. Using high quality housing material like PA66, PBT, PPS, BMC and so on.
4. Insulation class can be B, F, H, N, C;
5. Protection class can be IP65, IP67 & IP69K;
6. We also offer special coils like ex-proof coils, water proof coils and so on.
7. If you have special requirement, pls feel free to contact us.

Focus on your demands, Offer you best solution:

√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing

Welcome to your any question and inquiry!