|
Trade Verify
Address: Liandong-U-Gu 17-2#, Shengyuan Road 1#, Jiangkou Street, Fenghua District, Ningbo City, Zhejiang Province, China
Phone: +86-
Contact name:Jaren
YIKANG AUTOMATION |
|
Verified Suppliers
|
|
|
ø10 , ø16, ø20, ø25
●A large amount of gripping force is provided through the use of a double piston mechanism, while maintain- ing a compact design.
●Built-in variable throttle
●A solid state auto switch with an indicator light can be mounted.
| Specifications | ||
| Fluid | Air | |
| Operating pressure | Double acting | 0.1 to 0.6 Mpa |
| Single acting | 0.25 to 0.6 Mpa | |
| Ambient and fluid temperature | -10℃ to 60℃ | |
| Repeatability | ±0.01mm | |
| Max.operating frequency | 180 c.p.m | |
| Lubrication | Not required | |
| Action | Double acting, Single acting | |
| Auto switch (Option) | Solid state auto switch (3-wire,2-wire) | |
| Model | |||||
| Action | Model | Bore size (mm) | Gripping moment (N-m) | Opening/closing angel (Both sides) | Weight (g) |
| Double acting | MHC2-10D | 10 | 0.10 | 30º to －10º | 39 |
| MHC2-16D | 16 | 0.39 | 91 | ||
| MHC2-20D | 20 | 0.70 | 180 | ||
| MHC2-25D | 25 | 1.36 | 311 | ||
| Single acting | MHC2-10S | 10 | 0.070 | 30º to －10º | 39 |
| MHC2-16S | 16 | 0.31 | 92 | ||
| MHC2-20S | 20 | 0.54 | 183 | ||
| MHC2-25S | 25 | 1.08 | 316 |
Guidelines for the selection of the gripper with respect to workpiece mass
1.Although conditions differ according to theworkpiece shape and
the coefficient of frictionbetween the attachments and the
workpiece,select a model that can provide a grippingforce of 10 to
20 times the workpiece mass, ormore.
2. If high acceleration, deceleration or impact forces are
encountered during motion, afurther margin of safety should be
considered.o
3.If there is an overhang, please consult with SMC.
Indication of effective gripping force
1.The effective gripping force shown in thegraphs below is expressed as F, which is thethrust of one finger, when both fingers andattachments are in full contact with theworkpiece as shown in the figure below.
A Caution
Use caution for the anti-corrosiveness of finger guide section.
Martensitic stainless steel is used for the finger. However, be
aware that its anti-corrosion performance is inferior to austenitic
stainlesssteel. ln particular, the finger might be rusted in an
environment where water droplets are adhered to it due to dew
condensation.
How to Mount the Attachment to the Finger
To mount the attachment to thefinger, make sure to use awrench to support the attachment so as not to applyundue strain on the finger.Refer to the tablebelow for the propertightening torque onthe bolt used forsecuring the attachment to thefinger.
After-sale Service
One year quality guarantee Policy
We will check the goods quality before shipment. If there are some
unexpected problems happen, we hope to solve the problems with
buyer through friendly in the following ways:
1, If it is quality problem, buyer can submit argue within 15days
after receiving the goods, buyer must provide photos or video and
other evidence to seller for identify.
2, Man-made damaged, buyers take full responsibility.
3, Product quality processing program:
1) The buyer return the products for bad quality reasons for one
year (not included those damages coursed by shipping or Man-made
damaged ). A 15% restocking fee is assessed for any products
returned in "used" condition. And then we will send a new product
to buyer and pay for the resend shipping cost.
2) If the goods (total price including shipping is less than 10USD)
has quality problems, we will resend a new product in buyer next
order; if buyer don't plan to make a new order in the near term,
buyer can pay the resend shipping cost and ask to resend a new
product. If there is an issue with the products, please contact us–
we will solve it as soon as we get your email.
