|
Trade Verify
Address: Liandong-U-Gu 17-2#, Shengyuan Road 1#, Jiangkou Street, Fenghua District, Ningbo City, Zhejiang Province, China
Phone: +86-
Contact name:Jaren
YIKANG AUTOMATION |
|
Verified Suppliers
|
|
|
Description
1.As kinetic energy of moving object can notbe absorbed, it has
been stored temporarily,therefore following the increase of the
stroke,counter - acting force is getting strongerand stronger. It
reaches an summit when itcomes to the stroke end. It finally
andinevitably rebounds and causes themechanical damage.
2.In the early stage of moving object stroke, itinstantly stops the
moving object by peakcounter- 'actingforce. Itcauses
themechanicalshock. It then slowly slides to the stroke end.
3.Shock absorber can absorb the kineticobject energy as soon as
possible. It convertsto heat energy and sends out to the
air.Therefore the object shows linear decelerationin the whole
stroke. It finally and smoothlyslides and stops.
Hydraulic Shock Absorber Buffering Effect
All moving objects have kinetic energy, which depends on the weight
and speed of the moving object.To stop a moving object, a device
must be installed that ACTS directly on the object: springs,
rubber, air registers, or dampers, all of which are cheap but have
the fatal disadvantage of bouncing when struck by an external
force.The hydraulic buffer adopts the hydraulic principle. The
hydraulic oil is extruded through a specially designed orifice to
produce heat, which is transferred and distributed to the air
through the metal to realize the conversion of kinetic energy into
heat energy
Specification
| Model | Stroke(mm) | Every time Max.absorbing energy E (Nm) | Hour Max. absorbing energy Ec (Nm/hr) | Max.impact speed (m/s) | Working temperature(℃) | Weight/Kg |
| AD1412 | 12 | 20 | 24000 | 3.2 | -10 ~+85 | 0.09 |
| AD1416 | 16 | 22 | 26400 | 3.2 | -10 ~+85 | 0.09 |
| AD2020 | 20 | 39 | 30000 | 3.6 | -10 ~+85 | 0.23 |
| AD2030 | 30 | 40 | 35000 | 3.6 | -10 ~+85 | 0.245 |
| AD2525 | 25 | 85 | 51000 | 3.6 | -10 ~+85 | 0.35 |
| AD2540 | 40 | 100 | 84000 | 3.6 | -10 ~+85 | 0.455 |
| AD3625 | 25 | 150 | 90000 | 3.2 | -10 ~+85 | 0.955 |
| AD3650 | 50 | 300 | 108000 | 3.2 | -10 ~+85 | 1.1 |
Structure
Attention
1.It is strictly prohibited to knock or collide the shaft, which may easily lead to bending of the shaft. The surface of the shaft should not be covered with sewage or dirty oil, and the shaft must operate in a clean environment.Otherwise, it will increase the probability of product leakage and reduce the service life of the product.
2.It is strictly prohibited to spray paint on the pipe teeth and axis, otherwise it will affect the heat dissipation effect and oil leakage.
3.Do not burn: because the product is hydraulic oil, put into the fire will lead to fire or cause accidents.
4.It is strictly prohibited to use in vacuum and high pressure environment, otherwise it will damage the machine
After-sale Service
We can provide a series of after-sale service, such as product
introduction, mounting, debugging, technical support and so on.
