|
Trade Verify
Address: Liandong-U-Gu 17-2#, Shengyuan Road 1#, Jiangkou Street, Fenghua District, Ningbo City, Zhejiang Province, China
Phone: +86-
Contact name:Jaren
YIKANG AUTOMATION |
|
Verified Suppliers
|
|
|
Aluminium Compact guide cylinder GMP Series 25mm Stroke Pneumatic
Air Cylinders MGPM32-25
Ordering Code: MGPM32-25, Any other types please contact freely.
Order code
Installations
1.When load changes in the work, the cylinder with abundant output
capacity shall be ed.
2.Dirty substances in the pipe must be cleared away before cylinder
is connected with pipeline to prevent the entrance of particles
into the cylinder.
3.Necessary protection measure shall be taken in the environment with higher humidity, much dust or water drops, oil dust and welding dregs.
4.The cylinder shall avoid the influence of side load in operation to maintain the normal work of cylinder and extend the service life.
5.The medium used by cylinder shall be filtered to 40μm or below.
6.Relative cylinder with high temperature resistance or corrosion
resistance shall be chosen under the condition of high temperature
or corrosion.
7.If the cylinder is dismantled and stored for a long time, please
conduct anti-rust treatment to the surface. Anti-dust cap shall be
ed into the inlet and outlet ports. As the precision of the
manufacture and guide is high, never dismantle the fixed block or
cylinder cover without permission.
8.Anti-freezing measure shall be adopted under low temperature environment to prevent moisture freezing.
Specifications
| Action | Double acting | |
| Fluid | Air | |
| Proof pressure | 1.5MPa | |
| Max. operating pressure | 1.0MPa | |
| Min. operating pressure | ø12, ø16 | 0.12MPa |
| ø20 to ø100 | 0.1MPa | |
| Ambient and fluid temperature | –10 to 60° C (with no freezing) | |
| Piston speed | ø12 to ø63 | 50 to 500mm/s |
| ø80, ø100 | 50 to 400mm/s | |
| Cushion | Rubber bumper at both ends | |
| Lubrication | Non-lube | |
| Stroke length tolerance | 0~+1.5mm | |
Manufacture of Intermediate Strokes
| Part number | Refer to standard part numbers and ordering procedure. | Indicate -XB10 at the end of the standard model no. Refer to P.52 for order made specifications. | ||
| Applicable stroke (mm) | ø12, ø16 | 1 to 249 | ø12, ø16 | 11 to 249 |
| ø20, ø25, ø32 | 1 to 399 | ø20, ø25 | 21 to 399 | |
| ø40 to ø100 | 5 to 395 | ø32 to ø100 | 26 to 399 | |
| Example | Part no.: MGPM20—39 A spacer 1mm in width is installed in a MGPM20—40. C dimension is 77mm. | Part no.: MGPM20—39—XB10 Special body manufactured for 39mm stroke. C dimension is 76mm. | ||
Structures
1. ø12 to ø25/MGPM, MGPL
2. ø32 to ø63/MGPM, MGPL
3. ø80, ø100/MGPM, MGPL
Product show
Products Shopping Guide
For example: you want to purchase a batch of cylinders but you
don't know which type you are really want, so you can tell me all
your requirement and I'll recommend to you.
Quality Standards
The company for the products are brand new original products, no
second-hand and refurbished products, or leave a compensable ten
and return the full amount, but the buyer due to our purchase of
model error is not responsible for returns, another of the
company's sales of products enjoy one year from the date of
shipment quality assurance, according to the original quality
standards, during warranty with product problems, need confirmation
testing by the manufacturer, the supplier to be solved, the demand
side due to storage, use, poor maintenance caused by lower-quality
product, and not raise objections.
After-sale Service
We can provide a series of after-sale service, such as product
introduction, mounting, debugging, technical support and so on.
Competitive Advantage
| Our product features | Our Services Guarantee: |
| 1) Competitive price | 1) Prompt respond (Reply with 24 hours) |
| 2) Good quality | 2) Free Samples (Customer pay for the delivery cost) |
| 3) Professional Packaging | 3) Registration support. |
| 4) Produce according to Customers’ instruction | 4) Photos/videos are available during production. |
| 5) None delay shipment | 5) Loading inspection, and send loading photos before shipment. |
Warranty
All item Comes with Basic 3 Month Sellers Warranty, if item
defective in 3 Month, We will offer replacement without extra
Charger(including shipping fee)After we Receive the Defective item.
If item Defective after 3 Month, Buyers can still send it back, We
will contact suppliers or Manufactory for Warranty. Buyers Might
Need to pay the Shipping fee For resend the replaced item.
