AT92 1/2" 1" 1.5" 2" Spring Return Single Acting Pneumatic Actuator Silver Aluminum Alloy Materials

AT92 silver Aluminum alloy 1/2" 1" 1.5" 2" spring return Pneumatic single-acting actuator

WORKING CONDITIONS AND TECHNICAL DATA

1.Operating media:Dry or lubricated air or inert gases, provided that they are compatible with the actuator internal parts and lubricant. The operating media must have a dew point equal to –20°C (-4°F) or at least 10°C below the ambient temperature. The maximum particle size contained into the operating media must not exceed 30 µm.

2.Supply pressure:The maximum supply pressure is 8 bar (116 Psi), only for AT801U it is 7 bar (101,5 Psi).
For double acting and spring return actuators the working pressure is from 2.5 bar (36 Psi) to 8 bar (116 Psi).

3.Operating time (see technical data sheet):Caution: the operating time depends on several factors
such as supply pressure, supply system capacity (pipe diameter, flow capacity of pneumatic accessories), valve type, valve torque and figures, applied safety factor,cycle frequency, temperature, etc.

Important safety notice!

1.For safety reasons, the actuator must not be pressurized at any time during installation as injury may result.
2.The utmost cleanliness is required during air supply connection to the actuator i.e. the connecting pipe
thread, fittings and seals must be clean and dirt-free.

Quality Standards :

The company for the products are brand new original products, no second-hand and refurbished products, or leave a compensable ten and return the full amount , but the buyer due to our purchase of model error is not responsible for returns, another of the company's sales of products enjoy one year from the date of shipment quality assurance , according to the original quality standards , during warranty with product problems , need confirmation testing by the manufacturer , the supplier to be solved , the demand side due to storage , use, poor maintenance caused by lower-quality product , and not raise objections

Samples
You can send a sample to customize the products, we have many engineers can help it; If you want a product of mine, but you are not sure if it's what you want, so you can ask for a sample from me, it will be free.