YIKANG AUTOMATION |
Verified Suppliers
|
DSNU-16-25-PPV-A 33973 Aluminium Alloy Basic Version Gas Cylinder Double-acting Standard cylinder
DSNU
1. Cylinder barrel made of stainless steel
2. Bearing and end caps made of wrought aluminium alloy
Order code
DSNU - 16 - 10 - P - A
① ② ③ ④
⑤
① DSNU: Double-acting Standard cylinder
② Piston Φ [mm]
③ Stroke [mm]
④ Cushioning: P: Flexible cus hioning rings / pads at both ends
PPV: Pneumatic cushioning, adjustable at both
ends
PPS: Pneumatic cushioning, sel-adjustingat
both ends
⑤ Position sensing: A: Via proximity sensor
Materials
Piston rod: High-alloy stainless steel
Bearing cap: Anodised aluminium
Cylinder barrel: High-alloy stainless steel
End cap: Anodised aluminium
Seals: Polyurethane, nitrile rubber
Mounting attachments and accessories note
1. Cannot be used on the bearing cap in combination with bellows
kit DADB.
2. Only push-in fittings or one-way flow control valves with
cylindrical connecting thread (M or G thread) may be used for the
compressed air ports in conjunction with the DSNUP.
3. The bellows kit protects the cylinder (piston rod, seal and
bearings) against a wide range of media and thus prevents premature
wear. It can only be used in combination with an extended piston
rod.
General technical data | |||||||
Piston Φ | 8 | 10 | 12 | 16 | 20 | 25 | |
Pneumatic connection | M5 | M5 | M5 | M5 | G1/8 | G1/8 | |
Piston rod thread | M4 | M4 | M6 | M6 | M8 | M10x1.25 | |
Constructional design | Piston | ||||||
Piston rod | |||||||
Cylinder barrel | |||||||
Cushioning | P | Flexible cushioning rings/pads at both ends | |||||
PPV | – | Adjustable cushioning at both ends | |||||
PPS | – | Self-adjusting cushioning at both ends | |||||
Cushioning length | PPV [mm] | – | 9 | 12 | 15 | 17 | |
PPS [mm] | – | 12 | 15 | 17 | |||
Position sensing | Via proximity sensor | ||||||
Type of mounting | Direct mounting (MH variant only) | ||||||
Via accessories | |||||||
Mounting position | Any | ||||||
Weight [g] | |||||||
Piston Φ | 8 | 10 | 12 | 16 | 20 | 25 | |
Product weight with 0 mm stroke | 34.6 | 37.3 | 75 | 89.9 | 186.8 | 238 | |
Additional weight per 10 mm stroke | 2.4 | 2.7 | 4 | 4.6 | 7.2 | 11 |
Quality Standards
The company for the products are brand new original products, no
second-hand and refurbished products, or leave a compensable ten
and return the full amount, but the buyer due to our purchase of
model error is not responsible for returns, another of the
company's sales of products enjoy one year from the date of
shipment quality assurance, according to the original quality
standards, during warranty with product problems, need confirmation
testing by the manufacturer, the supplier to be solved, the demand
side due to storage, use, poor maintenance caused by lower-quality
product, and not raise objections.
Warranty
All item Comes with Basic 3 Month Sellers Warranty, if item
defective in 3 Month, We will offer replacement without extra
Charger(including shipping fee)After we Receive the Defective item.
If item Defective after 3 Month, Buyers can still send it back, We will contact suppliers or Manufactory for Warranty. Buyers Might Need to pay the Shipping fee For resend the replaced item.
Packaging shipping
1. If order is not big enough, we will provide Door To Door
service, we cooperate with UPS,DHL,FEDEX,TNT all year round,we
gurantee that the shipping price that we offer to you is the most
favorable price among so many suppliers in China.
2. By Air or By Sea through your forwarder is acceptable, if you
have no forwarder in China, we also could find you cost-effective
forwarder for your reference.