Active Member
|
[China]
Address: NO.8 Standard Building of Light Industry Zone,Nanbin Street
Contact name:Lily lee
Jinghua Machinery Co.,Limited |
|
|
JH 550 Automatic Plastic Thermoforming Machine for food box, egg trays box and plate
Introduction
Automatic Four Station Thermoforming machine is special design for PP and PS PVC Film. This machine is suitable for any of thermoforms plastic sheet. This Plastic Thermoforming Machine is update according to the mostly development technical, compare with the traditional machine, It can solved many impossible commitment
Automatic Four Station Thermoforming machine could forming and cutting neat and Clear. Cutting Off the product in order. Also good use for PP PS, PET,PVC etc.
Whole machine is mainly made up by four Parts:
Forming the products
Punching
Cutting
stacking the products
Specification:
| Model | 550H(Up & down heater) |
| Punch Frequency | 10-35punch/min |
| Material | PP/PS/PET/PVC/PLA |
| Max. Forming Length | 350mm |
| Max. Forming Width | 550mm |
| Max. Forming depth | 70mm |
| Upper and Lower Forming Power | Top heater 43kw, bottom heater 41KW |
| Total Power | 380V 50HZ 97KW Three-phase and four-wire |
| Water Consumption | 0.3m³/h (Tap water or recycle water) |
| Air Pressure | 0.5-0.8(mpa) |
| Exhaust Volume | ≥0.6 m³/min |
| Pressure of water supply | 0.2MPa |
| Machine overall size(L×W×H) | 5000*1675×1900mm |
| Area cost | 8700*3600 |
| The maximum width of material | 580mm |
| Weight | 5500KG |
Competitive:
1.Our company is a profession manufacture for Plastic Thermoforming Machine
2.This Thermoforming Machine Can use PP transparent Film
3.Change the mold is easy and fast, the forming mold have motor control
4.Use the Servo motor driving the sheet,
5.15 inches Touch screen Control, easy for Operation
6. forming, punching , cutting work independent , could move the distich on the rail .
7.stacking use robot, could stack different size, and depth products.
8. forming, and cutting control by separate servo motor.
