Active Member
|
[China]
Address: NO5, North Renmin Road, Changyinsha town,Zhangjiagang,Jiangsu,China
Contact name:
YUREFON MACHINERY CO.,LTD |
|
|
Description of PVC steel wire reinforced pipe hose extruder
making machine
This line is used to produce PVC steel wire reinforced hose. The
Wall of the Pipe is PVC transparent soft plastic, spiral steel wire
inside.The pipe is corrosion-resistant, antistatic, resistance to
high pressure, and other good characteristics,
It is suitable for transportation of high pressure and flammable
gases, liquids, and liquid impurities absorbing light line, mainly
used in mechanical, chemical, construction, agricultural irrigation
and vacuum equipment.
PVC Steel Wire Reinforced hose introduction:
This kind of reinforced hose is characterized by pressure
resistance, corrosion resistance, anlistatig, high-voltage
endurance, excellent circulation ability, etc. So the final
products of this line are applied to conveying air or gas, which is
high- pressure and flammable, also used in the heavily-sucked,
lightly-excluded of liquid impurity, and widely used in such areas
as mechanism, chemical laboratory, architecture, agricultural
irrigation, vacuum equipment and dust collector soft pipes, etc.
Flowchart of PVC steel wire reinforced pipe hose extruder
making machine
conveying feeding→single screw extruder→extruding mould→spray
cooling water tank→belt haul-off→fibre winder→warm up oven→single
screw extruder→mould→spray cooling water tank→belt haul-off →meter
measure→winder→finished product inspecting&packing
Technical parameters of PVC steel wire reinforced pipe hose
extruder making machine:
Model | SJ45 | SJ65 | SJ90 | SJ120 |
Extruder | SJ45/30 | SJ65/30 | SJ90/30 | SJ120/30 |
Diameter range(mm) | Φ12-Φ25 | Φ20-Φ50 | Φ50-Φ110 | Φ75-Φ150 |
Output(kg/h) | 20-40 | 40-75 | 70-130 | 100-150 |
Installed power(kw) | 30 | 40 | 50 | 75 |
