Active Member
|
[China]
Address: NO5, North Renmin Road, Changyinsha town,Zhangjiagang,Jiangsu,China
Contact name:
YUREFON MACHINERY CO.,LTD |
|
Plastic PVC Tile Trim Profile Extruder Production Line
PVC corner profile production line is used to produce PVC corner. This machine Can produce ONE TO FOUR corners at the same time, after extrusion the PVC corner, there is a punching Machine, it is used to punch hole on the PVC corner. The punching machine is our new design, it is Automatic line.
What is Features: PVC Corner Bead Machine/PVC corner bead production line/PVC corner bead extrusion line ?
1. Our PVC Corner Bead Extrusion Machine has features of low consumption,low noise,stable running..
2. This PVC Corner Bead Extrusion Machine include:extruder,mould,vacuum calibration table,haul-off machine,puching machine,cutter and stacker.
3. The extruder adopt special twin screw and barrel for extrusion.With different mould,itcan produce different shapes.
Flow Process: PVC Corner Bead Machine/PVC corner bead production line/PVC corner bead extrusion line
Main Composition: PVC Corner Bead Machine/PVC corner bead production line/PVC corner bead extrusion line
Product Description
1. Plastic PVC tile trim profile Machine- PVC/WPC tile trim and
corner bead Profile Extrusion and Making Machine is applied to
produce PVC tile trim profile corner bead profile tile the hollow
board like that
2. This production is composed of conical twin-screw extruder,
vacuum calibration table, haul-off, cutter and stacker.
3. Chang different extruding mould,this machine can also produce
PVC door & window profiles, foamed special shaped materials
profiles, decoration plate material, profile and multi-hole wire
plastic products, etc.
Introduction of the PVC wall panel extrusion making machine:
Description of PVC panel line:
1. This machine With PLC Control system in the production line,
reliable and stable performance.
2. The down stream equipment includes vacuum calibration and
cooling unit, haul-off unit, cutting machine and stacker.
3. The calibration unit is equipped with large forced cooling
system so that it can provide perfect calibration effect.
4. The hall-off unit is caterpillar style. The lower one is fixed
and the upper one can be adjusted according to the plate size.
5. The cutting machine is able to set length and provide accurate
automatic cutting.
6. The stacker is attached with material cart and rubber protection
layer to prevent products from damage, and easy operation.
Process Flow of PVC panel line:
Raw material +wood power+ additive → mixing → granulating → conical
twin-screw extruder → profile extrusion mould → cool molding die →
vacuum calibration support → belt haul-off → cutter → rack →
finished product inspecting & packing
Raw materials for pvc ceiling panel:
PVC + calcium + other additives.
PVC high chemical stability,panels can be used for a long time.
Feeder | • To feed material into extruder; |
Extruder | •World famous brand electrical component: Siemens,Schneider, ABB
etc; |
Die head | • 3Cr13/3Cr17 material |
calibration table | • Include full set of vacuum and water pump |
Haul off | • Upper/lower caterpillar driven separately and speed control by
inverter |
Cutter | • Lifting saw cutter with adopts double station dust collection
system |
Stacker | • Stainless steel304 as touching material |
Hot stamping machine | • Decorative pattern and film protection of product surface |
Technical information:
Parts | No. | Name | Brand |
1 Screw and barrel | 1 | Design | German design |
2 | Main materials | 38CrMoALA | |
3 | Screw heating | Silicon oil heating | |
4 | Barrel heater | Cast aluminum heater | |
5 | Barrel has vacuum exhausting system | ||
| |||
2 Driving parts | 1 | Main motor | Siemens Brand |
| 2 | Gear box | Top brand in China |
| |||
3 Electric parts | 1 | Inverter | ABB brand |
2 | Contactor | Schneider brand | |
3 | Relay | Schneider brand | |
4 | Breaker | Delixi brand | |
5 | Temperature meter | RKC brand | |
6 | Hauling motor | Densen brand | |
7 | Hauling gear box | Hard surface gear box | |
8 | Vacuum pump | Yvhuang brand | |
9 | Water pump | Yvhuang brand | |
10 | Cutting motor | Siemens brand | |
11 | PLC | Schneider brand | |
| |||
4 Mechanical parts | We use CNC machines to ensure the precision of our mechanical parts | ||
| |||
5 Protection system | We have a whole set of protection system for our machines, such as: | ||
For more technical information please contact us by email. | |||
