Active Member
|
[China]
Address: No.888, Kungang Rd, Songjiang Sci. & Tech. Park, Shanghai, P. R. China
Contact name:Vivian Chen
shanghai Guangsu Manufacture Co.ltd |
|
|
Miniature Injection Plastic Molding Machine 60T.
The GS-V plastic injection machine with variable pump series shows its excellent performance as below:
Energy saving 30-50%;
Quick response of system, short shaping period;
The oil temperature of system reduces greatly the produced heat;
Reduce the mold opening/closing impact, extending the service life of machine and mold;
Extend the service life of oil circuit system, reducing maintenance times, and saving large amount of maintenance cost;
High accuracy demand on hydraulic oil; and high accuracy return filter is provided.
Specification
| GS68V | |||||
| A | B | C | |||
| INJECTION UNIT | Screw Diameter | mm | 26 | 30 | 34 |
| Screw L/D Ratio | L/D | 24.2 | 21 | 19.5 | |
| Shot Size(Theoretical) | cm3 | 66 | 88 | 113 | |
| Injection Weight | g | 60 | 80 | 103 | |
| Injection Rate | g/s | 60 | 80 | 103 | |
| Plasticizing Capacity | g/s | 6.3 | 8.4 | 10.3 | |
| Injection Pressure | Mpa | 236 | 177 | 138 | |
| Screw Speed | rpm | 0-260 | |||
| CLAMPING UNIT | Clamp Tonnage | KN | 600 | ||
| Toggle Stroke | mm | 270 | |||
| Space Between Tie Bars | mm | 310*310 | |||
| Max.Mould Height | mm | 330 | |||
| Min.Mould Height | mm | 120 | |||
| Ejector Stroke | mm | 70 | |||
| Ejector Tonnage | KN | 22 | |||
| Ejector Number | piece | 1 | |||
| OTHERS | Max.Pump Pressure | Mpa | 16 | ||
| Pump motor Power | KW | 7.5 | |||
| Heater Power | KW | 5.1 | |||
| Hopper Capacity | Kg | 25 | |||
| Oil Tank Capacity | L | 180 | |||
| Machine Dimension(L*W*H) | m | 3.77*1.11*1.76 | |||
| Machine Weight | t | 2.5 | |||
Standard equipment:
1) Double cylinder balancing injections
2) High-torque oil-motor preplasticizing
3) Five pivots minus relief angle, double toggles, machine
hinge mold locking
4) Cabinet-type holder integrates the mold plate
5) Oil motor driven gear mold adjusting
6) Storage-type grease lubricating
7) Pressure and flow whole-proportion running
8) High-performance, low-noise oil pump
9) Multi-step pressure and speed adjusting
10) High-precision position linear transducer
11) Digital memory for mold group
