Active Member
|
[China]
Address: No.888, Kungang Rd, Songjiang Sci. & Tech. Park, Shanghai, P. R. China
Contact name:Vivian Chen
shanghai Guangsu Manufacture Co.ltd |
|
|
200T Butt Plastic Sheet Welding Machine
China GS Two Mix Color Injection Molding Machine for toothbrush
GS Plastic Two Mix Color Injection Molding Machine feature
We supply all kinds of injection molding machines from 60T to 3000T, including color chips making machines, energy saving injection molding machines, gears making machines, dual clear color injection molding machine bakelite injection molding machines, PET preform injection molding machines, Fixed pump and variable pump injection molding machines, PVC fitting injection molding machines and etc
Real photo for Injection Molding Machine,It is in stock.25 days,we can arrange shipment after order confirmed.
Advanced hydraulic system design, through proportional control of pressure, flow achieves rapid multi-level pressure, speed switching, the system configuration is reasonable, stable and reliable.
2. The products made by injection molding machine
Most plastic products is made by injection molding machine,Say: pipe fitting, pet preform, disposable spoon knife fork,bow,cup,container,pallet, food container. etc.
3. Auxiliary Equipment for Injection Molding Machine
Auto loader,Chiller,Crusher,Cooling Tower,Mixer,Hopper Dryer,water pump,robot, dehumidifier etc.if you need any other equipment,please feel freely contact with us.Thanks very much.click here send us a message
Detail specification:
|
| GS208V | ||
|
| A | B | C |
Injection Unit |
|
| ||
Screw Diameter | mm | 45 | 50 | 55 |
Screw L/D Ratio | L/D | 22.2 | 20 | 18.2 |
Theoretical Shot Size | cm3 | 389.7 | 481.1 | 582.1 |
Injection Weight | g | 354.6 | 437.8 | 529.7 |
Injection Pressure | MPa | 190 | 154 | 127 |
Injection Rate | g/s | 133 | 164.2 | 198.6 |
Plasticizing Capacity | g/s | 23.2 | 28.7 | 34.7 |
Ma×imum Screw Speed | rpm | 165 | ||
Injection Stroke |
| 245 | ||
|
|
| ||
Clamping Unit |
|
| ||
Clamping Force | kN | 2080 | ||
Toggle stroke | mm | 490 | ||
Space Between Tie Bars | mm | 530×530 | ||
Ma×imum Mold Height | mm | 550 | ||
Minimum Mold Height | mm | 150 | ||
Daylight Opening | mm | 1040 | ||
Ejector Stroke | mm | 140 | ||
Ejector Tonnage | kN | 62 | ||
Ejector Number | piece | 9 | ||
|
|
| ||
Others |
|
| ||
Maximum Pump Pressure | MPa | 16 | ||
Pump Motor Power | kW | 18.5 | ||
Heater Power | kW | 14.25 | ||
Dimension (L×W×H) | m | 5.45×1.48×2.05 | ||
Net Weight | t | 6.90 | ||
Hopper Capacity | kg | 50 | ||
Oil Tank Volume | L | 240 | ||
4.Key Components on GS Injection molding machine
Clamping unit,injection unit,electric system,valves,color screen,T
slot platen
Techmation controller etc. click here send us a message
