Equipped with 10 electric CNC axes, multiple tube bending stacks,
and the unique technology, this line of LYM tube benders can offer
one of the highest performance solutions available in the market.
Tube Bending + Push Bending
It can be integrated with Automatic Loaders (AF, AFM, Robots) and
Automatic Unloaders (AUL, Robots) for full automation. This tube
bender series can offer one of highest performance solutions
available in the market.
The LYM System
•Allows for automation of bending and cutting processes in one
machine, from a single tube
• This system creates minimum cutting deformation, enabling the
finished part to pass to the next process without having to
calibrate or deburr it
• Allows up to 18 sets bends((PLC type) on the same pipe,or 33 sets
bends( Industrial computer type)on the same pipe,maximizing
utilization of the complete tube.
• Ultra-large CPU that can hold the edition of 400 groups of
archives is applied. If it is not sufficient, transmission software
can be purchased and installed for the computer. The archives can
be stored in hard disk to expand the number of edit groups
infinitely. (Optional)
Advanced Technology
•Built-in gearbox with direct connection to electric servo.
•Highest transmission performance (90%+ efficiency).
•High bending accuracy (+/- 0.05° ~ +/-0.1°)
•Maximum Working Area and Minimal Interference.
•Heat exchanger is provided for the electric control system for
automatic heat dissipation. If required, NC air conditioner can be
purchased to ensure service life of electric control system.
(Optional)
•The machine is provided with automatic oil injection system to
reduce friction of elbow and ensure quality of elbow. (Optional).
LYM Controls, Tube Bender Software and Operation Interface
• Automatic springback compensation Recapturing function for short
lengths XYZ and YBC coordinates conversion
• 3D display of bending parts(Optional) Mirroring and image
reversal of parts
• Windows platform
• Self-diagnostics + Error messages display
• Each bends can set compensation value, speed and demould
clearance according to different materials
• For same tube, each elbow can have 5 action sequences and 10
sections of speed independently for operation of operators.
Besides, the work efficiency can be improved and tube interference
point can be reduced.
• Chinese and English on the touch screen can be switched and the
products can also be ordered according to requirements if it is
another language on the screen. (Optional)
• The feed position of feed trolley, the interference position of
safety device and digital module and interference position of guide
mould can be fine adjusted manually and memorized automatically to
eliminate the error of manual measurement and losses caused by
machine collision.
• Action segments can be selected during actual bending to observe
interference points and modification work and improve efficiency.
• After the completion of data editing, the data will be protected
by password to prevent unapproved alteration of the data.
(Optional)
3D Display and Rotation of Parts(Optional)
• XYZ and YBC coordinates conversion
• Mirroring and image reversal of parts