Home Companies Hangzhou Freqcontrol Electronic Technology Ltd.

3 Inch Single Crystal Quartz Wafer ST Cut For SAW Application

Contact Us

[China]

Trade Verify

Address: Room 1106, CIBC, No.198 Wuxing Rd, Hangzhou, P.R.China

Contact name:Xu

Hangzhou Freqcontrol Electronic Technology Ltd.

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

3 Inch Single Crystal Quartz Wafer ST Cut For SAW Application

Country/Region	china
City & Province	hangzhou shanghai

Product Details

3 Inch 4 Inch Single Crystal Quartz Wafer AT-Cut ST-Cut for SAW and MEMS

BonTek Optoelectronics provides high quality Single Crystal Quartz wafers in both SAW grade and optical grade. We can offer various orientation options including X cut , Y cut , Z cut , AT cut, ST cut, etc. or just any cut angle you can imaging for your unique applications at reasonable price.

Single Crystal Quartz Material Properties
Purity	Optical grade: 99.99%
Crystal Structure and lattice parameters	Hexagonal a= 4.914 Å c = 5.405 Å
Growth Method	Hydrothermal method
Hardness	7.0 Mohs
Density	2.684 g/cm³
Melt Point	1610 deg C (phase transition point: 573.1 °C)
Specific heat	0.18 cal/g
Thermoelectric Constant	1200 mV / °C @ 300 °C
Thermal conductivity	0.0033 cal/cm/ °C
Thermal expansion coefficient, (CTE) (x10^-6/ K)	perpendicular to Z axis: 13.71 parallel to Z axis: 7.48
Refractive Index	1.544
Q value Acoustic velocity, SAW Frequency constant, BAW Piezoelectric coupling,	1.8 x 10^6; 2.4 x 10^6, 3.0 x 10^6 3160 ( m/sec ) 1661 ( kHz/mm ) K2 (%) BAW: 0.65 SAW: 0.14
Inclusion	IEC Grade II

Diameter	3”(76.2mm)	4”(100mm)
Thickness	0.08mm Min-up	0.10mm Min-up
Primary Flat	22mm	32mm
Surface	TTV	<1.5~3 µm
	Bow	-30<bow<30
	Surface Type	SSP / DSP
	Polished side Ra	<1.0nm or per requested

FAQs:

Q: What are the products you mainly work on?

A: We look at ourselves as the piezo wafer specialist. We are the very first to work with Single Crystal Quartz in China about 30 years ago. Then gradually we step in the field of LiNbO3, LiTaO3, Quartz glass, LGS, CTGS etc. Especially, if you are looking for a piezo quartz supplier, we are the ultimate choice! We export millions of quartz blanks each year because we master the AT, SC and IT cuts with superior angle precision.

Q: Can you accept product customization?

A: Yes, of course. We can fabricate as per your request. In addition, we are so experienced with piezo wafers that we can provide you relevant suggestions if you are not 100% sure about your choice. Besides, we do have some standard wafers in stock, please check with us.

Acceptance Check

The product is fragile. We have adequately packed it and labeled it fragile. We deliver through excellent domestic and international express companies to ensure transportation quality.

After receiving the goods, please handle with care and check whether the outer carton is in good condition. Carefully open the outer carton and check whether the packing boxes are in alignment. Take a picture before you take them out.

Please open the vacuum package in a clean room when the products are to be applied.

If the products are found damaged during courier, please take a picture or record a video immediately. DO NOT take the damaged products out of the packaging box! Contact us immediately and we will solve the problem well.