Home Companies Hangzhou Freqcontrol Electronic Technology Ltd.

Sapphire Al2O3 Crystal Substrate 2'' 3'' 4'' Double Side Polished For Optical Use

Hangzhou Freqcontrol Electronic Technology Ltd.

Contact Us

[China] country

Trade Verify

Address: Room 1106, CIBC, No.198 Wuxing Rd, Hangzhou, P.R.China

Contact name:Xu

Inquir Now

Hangzhou Freqcontrol Electronic Technology Ltd.

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

Sapphire Al2O3 Crystal Substrate 2'' 3'' 4'' Double Side Polished For Optical Use

Country/Region china
City & Province hangzhou shanghai
InquireNow

Product Details

Sapphire Al2O3 Crystal Substrate Ultrathin 2'' 3'' 4'' Double Side Polished For Optical Use​

 

Single crystal sapphire Al2O3 possesses a unique combination of excellent optical, physical and chemical properties. These properties encourage its wide use of Sapphire Al2O3 optics in hostile environments where optical transmission in the range from the visible to the near infrared is required. The main application of optical sapphire is large aperture windows, viewports, illuminators for common-aperture optical systems (visible+IR) what make sapphire the top actual material due to its optical and mechanical properties.


Sapphire products are used in many fields as optical details (windows, plates, light guides and lenses, especially sapphire plane-parallel plates - windows, optical high-temperature substrates, exact mechanics details, bulbs of high pressure lamps and so on.

 

 

OPTICAL PROPERTIES

Transmission Range

0.17 to 5.5 microns

Refractive Index

1.75449 (o) 1.74663 (e) at 1.06 microns

Reflection Loss

at 1.06 microns (2 surfaces) for o-ray - 11.7%; for e-ray - 14.2%

Index of Absorption

0.3 x 10-3 cm-1 at 2.4 microns

dN/dT

13.7 x 10-6 at 5.4 microns

dn/dm = 0

1.5 microns

 

PHYSICAL PROPERTIES

Density

3.97 g/cm3

Melting Point

2040 degrees C

Thermal Conductivity

27.21 W/(m x K) at 300 K

Thermal Expansion

5.6 x 10 -6 /K (parallel C-axis) & 5.0 (perpendicular C-axis) x 10 -6 /K

Hardness

Knoop 2000 kg/mm 2 with 2000g indenter

Specific Heat Capacity

419 J/(kg x K)

Dielectric Constant

11.5 (parallel C-axis) 9.4 (perpendicular C-axis) at 1MHz

Young's Modulus (E)

335 GPa

Shear Modulus (G)

148.1 GPa

Bulk Modulus (K)

240 GPa

Elastic Coefficients

C11=496 C12=164 C13=115
C33=498 C44=148

Apparent Elastic Limit

275 MPa (40,000 psi)

Poisson Ratio

0.25

 

 

Acceptance Check

 

1. The product is fragile. We have adequately packed it and labeled it fragile. We deliver through excellent domestic and international express companies to ensure transportation quality.

 

2. After receiving the goods, please handle with care and check whether the outer carton is in good condition. Carefully open the outer carton and check whether the packing boxes are in alignment. Take a picture before you take them out.

 

3. Please open the vacuum package in a clean room when the products are to be applied.

 

4. If the products are found damaged during courier, please take a picture or record a video immediately. DO NOT take the damaged products out of the packaging box! Contact us immediately and we will solve the problem well.

Hot Products

Customized Piezoelectric Single Crystal Quartz Wafer 2inch 3inch 4inch 6inch 8inch per request ...
X-cut Y-cut Crystal Quartz Ring IEEE standard Double Side Lapped for Pressure Sensor There are a ...
BonTek BT DT Cut 4 Inch Crystal Quartz Wafers All single crystal quartz wafersshould be growthn from ...
BonTek Optoelectronics 3 Inch 4 Inch Quartz Wafers With Customised Orientation Quаrtz wafer hаvе mаn...
BonTek X Cut Quartz Ring For Pressure Sensing Y Cut For Thickness Shear There are a variety of ...
3 Inch 4 Inch Single Crystal Quartz Wafer AT-Cut ST-Cut for SAW and MEMS BonTek Optoelectronics ...