Home Companies Suzhou Delfino Environmental Technology Co., Ltd.

20.00Mg/L Dissolved Oxygen Transmitter For Sewage Water Treatment

Suzhou Delfino Environmental Technology Co., Ltd.

Contact Us

[China] country

Trade Verify

Address: Suzhou Xupai Road No.3

Contact name:Yuki Fu

Inquir Now

Suzhou Delfino Environmental Technology Co., Ltd.

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

20.00Mg/L Dissolved Oxygen Transmitter For Sewage Water Treatment

Country/Region china
City & Province suzhou
Categories Water Treatment
InquireNow

Product Details

 

0.00~20.00 Mg/L Dissolved Oxygen Sensor For Sewage Water Treatment

 

 

Dissolved oxygen sensor OPD70 measurement methods include polarography and fluorescence. Polarography is cheap, but requires regular replacement of the diaphragm and electrolyte. The fluorescence method is expensive, but does not need to replace the diaphragm and electrolyte, and requires less maintenance. The measurement method used by our OPD70 dissolved oxygen sensor is the Fluorescence principle.

 

On-line dissolved oxygen analyzer with OPD70 dissolved oxygen sensor maintenance-free, dissolved oxygen electrode can continuously monitor dissolved oxygen in water, NTC automatic temperature compensation, panel type, wall-mounted type, pipe clamping installation method is optional, suitable for various weather and various used in complex industrial environments.

 

 

Specification:

Product Name
DO sensor
Product Model
OPD700-YD01A
Brand Name
Daruifuno
Measuring Range
Oxygen content: 0.00~20.00 mg/L saturation:
Signal Type
Digital
Resolution
0.01mg/L 1%
Accuracy
0.1 mg/L 1%
Response Time
T90 less than 60s

Temperature compensation

 

Automatic, built-in temperature un
Calibration Method
Zero position/slope/de
Work Pressu
0~3Bar
Operating Temperatu
0.0~50.0℃
Material
ABS

Dimensions

 

Diameter: 35mm Total length: 260mm
Installation Size1"NPT at both ends of the installation thread; insertion depth 100 (including cleaning plug 1
Protection Grad
 
IP68

Weight

 

170g

Please click the user manual of DO sensor here:

OPD79 dissolved oxygen user manual.pdf

 

Brief introduction:

● Fluorescence principle
● The digital sensor is conducive to long-distance signal transmission without serious signal attenuation
● No calibration required, can meet the requirements of field work, short-term or long-term operations
● Without consuming oxygen, accurate measurement can be achieved when oxygen concentration is low
● All-in-one package, can be used with the online transmitters, DTU, and portable instruments
● RS485 interface, Modbus RTU, support access to standard industrial control system
● The protection grade is IP68, can work continuously and stably under water for a long time
● Internal storage of calibration data, support offline calibration, plug and play on site

 

 

Aplication:

◇ Sewage
◇ Surface water monitoring
◇ Aquaculture water bodies
◇ Urban sewage treatment
◇ Industrial wastewater treatment
◇ Aquarium

 

FAQ

1. What is the measuring principle of this dissolved oxygen sensor?
A: This dissolved oxygen sensor uses the fluorescence method, covering the detection head with a layer of fluorescent material, and the LED light source in the sensor emits blue light to the head.The fluorescent substance on the surface emits red light when the fluorescent substance is excited. The higher the dissolved oxygen concentration, the shorter the time from emitting blue light to red light. Use red light release timeThe phototropism between the concentration of dissolved oxygen and the concentration of dissolved oxygen, the sensor calculates the concentration of dissolved oxygen in the medium.
 
2. What is the advantage of digital dissolved oxygen sensor?
A: The digital DO sensor is conducive to long-distance signal transmission without serious signal attenuation. The sensor has RS485 interface, standard Modbus RTU communication protocol.
 
3. Can the DO sensor work under water?
A: Certainly. The protection grade of the dissolved oxygen sensor is IP68, it can work under water for a long time.


4. What is the wire length of the DO electrode?
A:
The lead wire of this electrode is 1 m by default, other lengths need to be customized, contact our customer service, the price will vary with the change of length.

 

  

Hot Products

Online OTA RS485 Interface Dissolved Oxygen Meter For Industry Water Monitoring Common applications ...
0.00~20.00 Mg/L Dissolved Oxygen Sensor For Sewage Water Treatment Dissolved oxygen sensor OPD70 ...
RS485 Digital DO Sensor For Water Treatment Monitoring And Dosing Control The OPD79 fluorescence ...
RS485 Interface PH Controller -2~+16pH For Water Treatment Monitoring DUC2-PH-H-A is a self...
Digital pH Meter With cleaning control For Industrial Processing Control DUC2-PH-H-D is a self...
OTA Online PH Transmitter with two settable 0/4~20mA current outputs DUC2-PH-H-A pH transmitter is ...