Hangzhou SED Pharmaceutical Machinery Co.,Ltd. |
Verified Suppliers
|
|
Small Hard Cosmetic Capsule Filling Machine With Fully Automatic Control
Products Description of Capsule Filling Machine
The machine has the closed rotating disc with ten stations, with feature of high precision and low noise. It can be continuously running and adopts frequency control, includes the whole capsule filling process such as capsule feeding, separating, powder
and granules filling, waste capsules rejecting, capsule locking and finished capsule outputting. The machine main parts of the bearing and electrical equipment from international famous brand, has a stable performance and can be run at a high speed.
Detailed Parameters of Capsule Filling Machine
Model | SED-800J-A |
Productivity | 800 Capsules/min |
Size of capsule | Capsule size 00#~4# |
Total power | 3.35kw |
Power supply | Three-phase four-wire AC 380V 50Hz |
Capsule sowing accuracy | ≥99.5% |
Overall dimensions | 1000*1300*1900mm |
Weight | 1000kg |
Working Principle of Capsule Filling Machine
The working principle of the automatic capsule filling machine is
divided into two parts, which are the movement of the capsule and
the filling of the medicine:
1. Movement of the capsule
During the filling process of the intermittent capsule filling
machine, the movement of the capsule depends on the indexing box
for intermittent and discontinuous rotation. The filling volume of
the capsule is mainly determined by the volume of the metering
disc hole. The hollow capsule is in the capsule hopper, the main board moves up and down, the capsule enters the capsule guide groove by its own gravity, and then the horizontal fork and the vertical plug are used to make the capsule cap upward and
the capsule body downward into the upper and lower modules. The
capsule body and capsule cap are separated under the action of the
device, and then the module enters the powder filling station.
2. Drug filling
The sensor in the powder holding ring controls the screw feeding
rod above it, and the medicine is continuously added to make the
height of the powder in the powder holding ring constant. position,
push the drug column into the capsule body. After that, it
enters into the capsule rejection, capsule locking, finished capsule discharge, and module cleaning stations in turn, and then enters a new round of station cycle, and the cycle begins again and again.
Feature of Capsule Filling Machine
1. The automatic capsule filling machine has beautiful appearance,
fine craftsmanship, simple operation and convenient use;
2. The filling seat and the metering disc are integrated, so that
the metering disc and the filling rod will not be offset, avoiding
the friction between the filling rod and the metering disc,
improving the filling accuracy and prolonging the service life;
3. The fully automatic capsule filling function can automatically
remove defective capsules, recover the drugs in defective capsules,
and reuse them to improve economic benefits;
4. The automatic capsule filling machine is simple and convenient
to disassemble and clean, and can exchange various types of molds,
and various molds can be exchanged and used on the same machine to
meet the requirements of different production capacities;
5. The vacuuming, vacuuming habits and exhaust pipe are designed
inside the body to avoid the phenomenon of hardening, breaking and
air leakage of the trachea, which is convenient for the work
surface to be clear and meets the requirements of GMP;
6. The filling rod nut is made of stainless steel instead of the original plastic nut to avoid cracking; the working table has fewer screws and nuts, which is easy to clean and makes the whole machine more beautiful.
Products Show of Capsule Filling Machine
Application of Capsule Filling Machine