Anping Wannuo Wire Mesh Products Co., Ltd. |
|
Custom Made Good Quality Decorative Perforated Aluminium Sheet
Description:
Product Name | Perforated Aluminium Sheet |
Material | Aluminium |
Grade | 1050,1060, 1100, 3003, 3105,3004,5052,5083,5754,6061etc |
Hole shape | Customer require |
Color | Customer require |
Standards | ASTM-B209. ENAW, GB/T3880.1-2008 |
Quality materials | Totally free from defects like white rust, oil patches, roll marks, edge damage, camber, dents, holes, break lines, scratches etc |
MOQ | 3TON |
Application | Mainly used insigns, billboards, building exterior decoration, bus body, high-rise buildings and factories wall decoration, kitchen sink, lamp, fan leaves, with pieces of electronic, chemical equipment, sheet metal processing parts, deep drawing or spinning hollowware, welding parts, heat exchangers, bell surface and disk, plate, kitchenware, decorations, reflective devices, ect |
Delivery time | 20days after 30% T/T payment or receiving L/C copy |
It is a relatively light metal compared to metals such as steel,
nickel, brass, and copper and is rather malleable. It can have a
wide variety of surface finishes and is highly reflective to heat
and light. For most applications, perforated aluminum sheets need
no protective coating but are often anodized to improve color and
strength.
Perforating can reduce the weight of a piece of metal without
affecting its strength too adversely. Aluminum perforated metal has
a greater structural strength than expanded metals of comparable
thickness.
Sizes:
Various sizes and patterns available in 4’ X 10’ and 12’ lengths
Regular - Is sheet simultaneously slit and stretched into a rigid,
non-raveling open mesh.
Flattened - is manufactured by processing regular expanded metal in
a rolling mill resulting in a smooth flat sheet.
Perforated metal pattern includes round hole pattern, slot side stagger pattern, square hole pattern and so on. We can produce all of patterns which fall into one of six basic categories. The available perforated patterns and information specific to each category, including formulas for determining the percent open area (%OA) and holes per square inch (HPSI), are contained within their respective section.
The majority of the patterns shown within each section represent the most commonly used patterns that our existing tooling produces. Due to the versatility of the tools and presses, it is not practical to show every possible pattern that can be produced. Because of the vast number of patterns that can be produced from our tools, it is likely that your requirement can be fulfilled with existing tooling.
Features:
Aluminum perforated panel is extremely useful at low-temperatures.
At subzero temperatures its strength increases while retaining
ductility. At temperatures over 400F aluminum alloy sheets tend to
lose some of their strength.
1. Round Perforations: Staggered (60 degree pattern) is standard.
2. Variations include 45 degree staggered, and straight line
pattern.
3. Square Perforations: Staggered or straight line pattern.
4. Slotted Perforations: Side staggered, end staggered, or straight
lines.
5. Slotted perforations will be round end slots; specify if square
end slots are required.
6. Other Perforations: Available upon request.