Results forpenetrant testing with iso standardfrom 68 Products.
|
|
Standard Penetration Test Sampler for Surveying investigation Detailed products: Geotechnical investigation Standard penetration test Standard Penetration Test (SPT) The standard ...
|
|
|
|
|
SPT split tube Complete For Standard Penetration Test Soil Sampling Standard Penetration Test Standard Penetration Test The standard penetration test (SPT) is an in-situ dynamic ...
|
|
|
|
|
Soil Sampling Equipment, Automatic Trip Hammer for Standard Penetration Test Soil Sampling Soil Sampling Equipment Soil sampling equipment for obtaining soil samples at or near the ...
|
|
|
|
|
ISO 9185 Molten Metal Splash Test Device Product Profile The thermal penetration resistance of protective clothing materials used to prevent a large number of molten metal splashes ...
|
|
|
|
|
IEC60529 ISO 20653 Rain Spray Simulation Resistance Pressure Water Splash Test Machine Product Description: This Programmable rubber/ plastic Rain Test Chamber is used to ...
|
|
|
|
|
Ip5x/Ip6x Sand Dust Resistance Weather Spraying Ip Rain Spray Test Chamber Product Description: This Programmable rubber/ plastic Rain Test Chamber is used to simulating the ...
|
|
|
|
|
SD-2801A Needle Penetration Tester The PRC Standard GB/T4985, GB/T269 ISO 2137:1985 SD-2801A Needle penetration tester SD-2801A needle penetration tester is designed and manufactur...
|
|
|
|
|
2 inch Automatic Trip Hammer SPT Sampler for Lithological Description The standard penetration test (SPT) is an in-situ dynamic penetration test designed to provide information on ...
|
|
|
|
|
Grease Worker According to GB/T269-91Grease and petroleum grease cone penetration determinationASTM D217 ISO2137 Petrol SH269 Grease Worker according to GB/T269-91 "Grease and ...
|
|
|
|
|
GB/T17630 ISO 13433 Geotextile Cone Drop Punch Dynamic Perforation Tester Scope of application: This instrument is used to determine the ability of geotextiles and related products ...
|
|
|
|
|
Penetrant testing test specimen Model:YM-B All linear dimensions to the requirements of AS2083/2005, BS2704/1978/1983, where applicable. Heat treatment to the requirements of GB...
|
|
|
|
|
Penetrant testing test specimen Model:YM-D All linear dimensions to the requirements of AS2083/2005, BS2704/1978/1983, where applicable. Heat treatment to the requirements of GB...
|
|
|
|
|
5 Points Chrome Plating Test Block Penetrant Testing Block Test Specimen YM-C Type C Model:YM-C type C All linear dimensions to the requirements of AS2083/2005, BS2704/1978/1983, ...
|
|
|
|
|
Standard: ISO 6530: 2005:Protective clothing - Protection against liquid chemicals - Test method for resistance of materials to penetration by liquids. Specification of AIC-6530 ...
|
|
|
|
|
Penetrant testing test specimen Model:TM-B3 All linear dimensions to the requirements of AS2083/2005, BS2704/1978/1983, where applicable. Heat treatment to the requirements of GB...
|
|
|
|
|
Calibration Block Penetrant Testing Specimen YM-B(B3) Depth 100μm Width Target Value 0.5μm Model:YM-B(B3) All linear dimensions to the requirements of AS2083/2005, BS2704/1978/1983...
|
|
|
|
|
ISO Tensile Strength Testing Equipment , Fabric Tearing Strength Tester Product Description Tearing Strength Tester used to determine the amount of diaper covering material that ...
|
|
|
|
|
Masks Synthetic Blood Penetration Resistance Tester APPLICATION Masks Synthetic Blood Penetration Resistance Tester is used for the resistance of medical masks to the penetration ...
|
|
|
|
|
Spuncture Resistance Tester , Puncture Strength Tester With Load Sensor STANDARD ISO 20344 5.5/EN 12568 5.1.3.1.1 for compression tester for toe cap& ISO 20344.5.8.2 nail ...
|
|
|
|
|
Mask Testing Equipment Synthetic Blood Penetration Resistance Tester 305mm Stroke Application Masks Synthetic Blood Penetration Resistance Tester is used for the resistance of ...
|
|
|
You may also be interested in :
