Active Member
|
[China]
Address: No.11, Road Changchun,Zhengzhou,Henan,China
Contact name:Angels Zhu
Zhengzhou Halnn Superhard Materials Co., Ltd |
|
|
Top sales of long life CBN Cutting Inserts Cutting Mud pump with excellent wear resistance
1. Halnn Tools Top sales of long life CBN Cutting Inserts Cutting Mud pump with excellent wear resistance
In previous times, manufacturers choose carbide insert for machining
pumps, which has low efficiency, the reasons as follows:
Then they try ceramic cutters, the characteristics are as follows
Co-efficient fiction
Ceramic cutters can machine pump, but it is brittle, it will be easily chipping when meet casting defects, only can be used for fine finishing process.
CBN Inserts are mainly used for machining high hardness materials, the hardness is higher than ceramic insert and carbide insert, also can be used for high speed cutting, especially Halnn BN-K1 solid cbn insert.
2. CBN Cutting Inserts Characteristics
| Recommend CBN Grade | Machining Materials | Process | Cutting Parameters | ||
| Cutting Speed Vc (m/min) | Cutting Depth ap | Feed Rate Fr(mm/r) | |||
| (mm) | |||||
| BN-K1 | (Hardness:HRC35-68) | Roughing | 35-120 | 1-10 | 0.15-1.0 |
| BN-K10,BN-H10 | High Hardness Cast Iron | Finishing | 60-200 | ≤1 | 0.05-0.35 |
3.Detailed Data of CBN Cutting Inserts
 | |||||||||
| Type | Dimension | Standard Chamfer | Grades | Corresponding tool holder | |||||
| L(mm) | φI.C(mm) | S(mm) | r(mm) | BN-K1 | BN-S20 | BN-S200 | |||
| CNMN120404 | 12.9 | 12.7 | 4.76 | 0.4 | S01020 S01025 S02020 S02030 S02530 S03020 | ● | ● | ● | CCLNR/L |
| CNMN120408 | 12.9 | 12.7 | 4.76 | 0.8 | ● | ● | ● | ||
| CNMN120412 | 12.9 | 12.7 | 4.76 | 1.2 | ● | ● | ● | ||
| CNMN120416 | 12.9 | 12.7 | 4.76 | 1.6 | ● | ● | ● | ||
| CNMN120704 | 12.9 | 12.7 | 7.94 | 0.4 | ● | ● | ● | ||
| CNMN120708 | 12.9 | 12.7 | 7.94 | 0.8 | ● | ● | ● | ||
| CNMN120712 | 12.9 | 12.7 | 7.94 | 1.2 | ● | ● | ● | ||
| CNMN120716 | 12.9 | 12.7 | 7.94 | 1.6 | ● | ● | ● | ||
4.Pictures of Halnn Tools CBN Cutting Inserts
5.Application Case of Top sales of long life CBN Cutting Inserts Cutting Mud pump with excellent wear resistance
| Machining Part: High Chromium Cast iron Mud Pump | |||
| Workpiece Hardness:HRC 60 | |||
| Cutting Type:Dry Cutting | |||
| Machining Materials:High Cr White Cast iron(Cr26) | |||
| Inserts Grade:BN-K1 CNMN120404 | |||
| Cutting Parameters:ap=3.5mm,f=0.1mm/r,Vc=75m/min | |||
| Testing Performance | |||
| Inserts Materials | Linear Speed(m/min) | Feed Rate(mm/r) | Lifetime/edge |
| Halnn BN-K1 | 82 | 0.1 | 85 |
| Ceramic Inserts | 38 | 0.08 | 10 |
6.FAQ
Q1. How is your quality?
A1. We have a very seriously control system. We guarantee the high performance of our products.
Q2.What is the Warranty for your products?
A2. For one year from the date of purchase, If any problem on our side, we will make prompt response, and take the shipping cost and send replacement.
