Zhengzhou Halnn Superhard Materials Co., Ltd |
|
BN-H10 PCBN Turning Tool Interrupt Cutting GCr15SiMn Hardened Steel
Wind turbine bearing
1. Halnn Tools BN-H10 PCBN Turning Tool full form Interrupt Cutting
GCr15SiMn Hardened Steel Wind turbine bearing
With the continuous development and innovation of the tool
industry, the company has finally developed a high-efficiency
cutting tool and realized the “replacement grinding by turning”
process. The “turning for grinding instead of grinding” process not
only avoids grinding burns, but also mainly performs dry cutting,
achieving clean production and creating a good processing
environment.Tool materials that can be used to “turn and grind
instead of grinding” slewing bearings are coated, ceramic and CBN.
In order to reduce the production cost, different parts need to
choose different tool materials. For example, the slewing bearing
with larger diameter gears is better to choose more wear-resistant
ceramic tools and CBN tools.Secondly, ceramic tools and CBN tools
can be used in combination, among which ceramic tools are brittle.
CBN tool hardness is second only to diamond. It is called superhard
tool and can process ferrous metal above HRC45, especially in the
field of hardened steel.
2.Detailed Data of PCBN Turning Tool
Type | Dimension | Standard Chamfer | Grades | ||||||
L(mm) | φI.C(mm) | S(mm) | φd(mm) | r(mm) | BN-H05 | BN-H10 | BN-H21 | ||
WNGA080404-6S | 8.7 | 12.7 | 4.76 | 5.16 | 0.4 | S01015 | ◎ | ◎ | ◎ |
WNGA080408-6S | 8.7 | 12.7 | 4.76 | 5.16 | 0.8 | ◎ | ◎ | ◎ | |
WNGA080412-6S | 8.7 | 12.7 | 4.76 | 5.16 | 1.2 | ◎ | ◎ | ◎ |
3.Halnn Tools CBN and PCD Cutting Tool
4.Application Case of PCBN Turning Tool Machining Bearing
BN-H10 PCBN Turning Tool Interrupt Cutting GCr15SiMn Hardened Steel
Wind turbine bearing
BN-H10 PCBN Turning Tool processing bearings | |||
Machining Part:Slewing bearing ring | |||
Workpiece Hardness:HRC 55 | |||
Cutting Type:Dry Cutting | |||
Machining Materials:GCr15SiMn | |||
Inserts Grade:BN-H10 | |||
Cutting Parameters: ap=0.5mm,Fr=0.45mm/r,Vc=110m/min. | |||
Testing Performance | |||
Inserts Materials | Linear Speed (m/min) | Lifetime/edge | Roughness |
Halnn BN - H10 | 110 | 8 | Ra0.8 |
Ceramic Inserts | 90 | 1 | Ra1.6 |
5.Service
|