|
[China]
Trade Verify
Address: M1 Building, Huang Jin Innovatin Park, Wang Chen area, ChangSha , Hunan China
Contact name:Angel
CHN-TOP SCI&TECH CO., LTD. |
|
Verified Suppliers
|
|
|
47mm Diameter PCD Composite For Wood Cutting High Thermal Stability
Description:
Thickness scan of PCD layer. CHNTOP offers a unique ultrasound scan that can map the thickness distribution of the PCD layer. The PCD scan identifies the 'North Point', which matches the 'North Point' laser-engraved on the disc, enabling users to optimize the cutting areas.
Quick Details:
1. Sharp cutting and high impact and surface finish.
2. Good balance of toughness and wear resistance is required.
3. Longer tool life, high abrasion resistance.
4. Highly improved work piece quality and excellent dimensional
control.
5. Enhancement of composite properties.
| Specifications | |
| Name | Polycrystalline Diamond |
| Brand | CT-S&T |
| Country | China |
| Usage | PCD inserts cutting tools |
| Application | Metal,Nonmetal,Wood |
| Thickness | 1.6/2.0/3.2 |
| Availability | In stock |
| Transportation | DHL, UPS, TNT, FEDEX |
| Grit | 3-28um |
M-Series
| Grade | Grit Sizeμm | Thickness mm | Diameter mm | Wear resistance | Impact | Conductivity |
| ZT005 | 5 | 1.6/2.0/3.2 | 47.0/54.0 | Low | High | High |
| ZT10M | 10 | 1.6/2.0/3.2 | 47.0/54.0 | Middle | Middle | Middle |
| ZT025M | 25 | 1.6/2.0/3.2 | 47.0/54.0 | High | Middle | Low |
| ZT302M | 30/2 | 1.6/2.0/3.2 | 47.0/54.0 | High | Middle | Low |
W-series
| Grade | Grit Sizeμm | Thickness mm | Diameter mm | Wear resistance | Impact | Conductivity |
| ZT10W | 10 | 1.6/2.0/3.2 | 47.0/54.0 | Middle | Middle | Middle |
| ZT025W | 28 | 1.6/2.0/3.2 | 47.0/54.0 | High | Middle | Low |
| ZT302W | 30/2 | 1.6/2.0/3.2 | 47.0/54.0 | High | Middle | Low |
Application:
PCD cutting tool blanks are widely used for the machining of non-ferrous metals and alloys, such as aluminum, copper, aluminum / gray iron composites, as well as nonmetallic materials such as wood, chipboard, ceramics, plastic, rubber etc, where high abrasion resistance and good surface finish are required. The products are available in 5um, 10 um and 25um.
