CHN-TOP SCI&TECH CO., LTD. |
Verified Suppliers
|
47mm diameter PCD Blank For wooden Cutting High Wear Resistance
Quick Details:
1. Sharp cutting and high impact and surface finish.
2. Good balance of toughness and wear resistance is required.
3. Longer tool life, high abrasion resistance.
4. Highly improved work piece quality and excellent dimensional
control.
5. Enhancement of composite properties.
Description:
PCD cutting tool blanks consist of PCD layer integrally sintered at ultrahigh pressure and high temperature to a cemented tungsten carbide backing. They have the high hardness and abrasion resistance of nature diamond, and combined with the toughness that of tungsten carbide. Their life are 10 to 100 times of tungsten carbide cutters.
The CBN/PCD insert are made in Chinese factory. Our aim is to reduce your cost and improve the work-effiency by our technical service. We are offering you both standard/special cutting tools either under CHNTOP label or your own label.
Specifications | |
Name | Polycrystalline Diamond |
Brand | CT-S&T |
Country | China |
Usage | PCD inserts cutting tools |
Application | Metal,Nonmetal,Wood |
Thickness | 1.6/2.0/3.2 |
Availability | In stock |
Transportation | DHL, UPS, TNT, FEDEX |
Grit | 3-28um |
M-Series
Grade | Grit Sizeμm | Thickness mm | Diameter mm | Wear resistance | Impact | Conductivity |
ZT005 | 5 | 1.6/2.0/3.2 | 47.0/54.0 | Low | High | High |
ZT10M | 10 | 1.6/2.0/3.2 | 47.0/54.0 | Middle | Middle | Middle |
ZT025M | 25 | 1.6/2.0/3.2 | 47.0/54.0 | High | Middle | Low |
ZT302M | 30/2 | 1.6/2.0/3.2 | 47.0/54.0 | High | Middle | Low |
W-series
Grade | Grit Sizeμm | Thickness mm | Diameter mm | Wear resistance | Impact | Conductivity |
ZT10W | 10 | 1.6/2.0/3.2 | 47.0/54.0 | Middle | Middle | Middle |
ZT025W | 28 | 1.6/2.0/3.2 | 47.0/54.0 | High | Middle | Low |
ZT302W | 30/2 | 1.6/2.0/3.2 | 47.0/54.0 | High | Middle | Low |
Application:
PCD cutting tool blanks are widely used for the machining of non-ferrous metals and alloys, such as aluminum, copper, aluminum / gray iron composites, as well as nonmetallic materials such as wood, chipboard, ceramics, plastic, rubber etc, where high abrasion resistance and good surface finish are required. The products are available in 5um, 10 um and 25um.