Active Member
|
[China]
Address: 29th floor room 15 No.5 Commercial building B block ,the 2nd section Wuchang Fu west,No.32 Wenzhi street,Hongshan district,Wuhan city,China
Contact name:
Hubei Nuojin Sen Technology Co.,Ltd |
|
|
Self drying acid resistant and corrosion resistant for copper,metal,glass and plastic surface etching
Product introduction
It is acid resistant and anti etching ink ,which used for etching method to make circuit board pattern.The utility model has the advantages of good image reproduction,high resolution,good appearance and excellent corrosion resistance.
Technical guidnce form is as follows:
| color | blue |
| viscosity | 150-250dpa.s |
| etch | acidic FeCl,CuCl2 etching solution,temperature 20+2C |
| potion etching | 40+10C,3-5%NaOH solution,20-40s,spray pressure 1.5-2kg/cm |
| environmental standards | comply with ROHS directives requirements |
| storage security | 25+5 DEG C,stored in a cool dry state for 6 months |
Operating parameters
1.Substrate surface pretreatment
With 3-5% sulfuic acid water cleaning ,grinding brush wheels were 500,800,1000 mesh,1200 mesh,the drying temperature is 80DEG-120DEG 10mm-20mm,grinding mill,require time is more than 20s.
2.Open oil
Will be fully mixed with the ink after mixing,stirring after the completion of static 15min or more,so that the ink viscosity stability in the use of.
3.Screen printing
Screen printing:take 100-120T nylon diagonal net tension 23+1N
Squeegee angle of 5-20 degrees2-6kg/cm-pressure
4.Dry
Room temperature 2H or 70-90C for 10-15min
Note:According to actual temperature and humidity of the environment,there is a big difference in the drying time ,but shoube be completely cured ink.
5.Etching
Acid(or Alkaline)etching solution:temperature 40-10DEG C,the proportion of 24-28Be,55-60s,2.5-3.0kg/cm(20Z copper 120-150s)-pressure.
6.Ink removal
40+10C,3-5% NaOH solution,20-40s,spray pressure-1.5-2.0kg/cm
Matters needing attention:
This specification in all parameters and results for the company's test data,can only be done for early reference,as a guarantee and basis,paractical application to customers for the field test conditions and test results.
1.Service
A.You can get the competitive price with high quality
B. We focus on the product material to use different stuff.
C.We teach customers to improve the production time.Help customers
development the new process.
2.Our Advantage:
A. We have very strong production capabilities.
B. We have very strong OEM & ODM ability.
C. We have our own quality control systerm.
