Active Member
|
[China]
Address: E Building,YuSheng Industrial Park, Beside ZhoushiRoad,Jiuwei,Xixiang,Bao'an,Shenzhen,Guangdong, China
Contact name:Xia
ShenZhen Jinling Electronics Co.,Ltd |
|
|
2.54mm Ejector Header Connector PBT Insulator Straight Type for PCB
| Contact Material | Brass Gold plated |
| Insulator Material | PA9T/LCP |
| Contact Plating | Gold plated |
| Withstanding Voltage | 1000V AC/minute |
| Insulation Resistance | 1000MΩ Min |
| Package : | Reel packing/tube packing/ bag packing |
| soldering type | Straight |
| Max ProcessingTemperature: | -230 ℃ for 30~60S (260℃ for 10S) |
| Contace Resistance: | 20 MΩ Max |
| Packing Method: | Tray |
Company Information:
Company history:
In July,2004, Shenzhen Jinling Electronic CO., Ltd was established, the company focused on connector metal stamping mold R&D , manufacturing and plastic mold and assembly.
In June,2005 the company has passed the CQC certifications ISO9001:2008 and ISO14001:2004.
In 2007, the company registered the trademarks”JILN”and”NETECH”
In January,2008, the product of the company were rated as good quality products by Market Protection Committee of China’s Famous brand products.
In April,2008, The products of the company were rated as “Green Products” by international Green Management Committee.
Production Capability:
The factory with area of 20,000 square meters and has about the total number of employees 600 people and owns 30 sets precision mold processing equipment from Taiwan, 34 sets precision plastic injection machine from Taiwan& Japan, as well as 24 sets high –speed precision punch,
Complete Testing Equipment:
Certifications:
FAQ:
What is the testing procedure to power connector?
1. Preparing the probe and make it meet the standard, forbid to use copper wire to detect, in prevent to enlarge the port hole of the connector or damage the inner wall of port or in case to crook the pin of connector.
2. Before the testing, should to check if the header and socket of power connector in equipment isn’t available, once the outlook is damaged, the pin has corroded, or the shape of port hole has changed, or has contaminated by dust, the guide line is cracked, or fracture of wire,please stop.
3. the operation of plug and pull to power connector when in testing , which should be proceeded behind the power cut off and static time more than 3 minutes, do not support hot plugging.
4. After finish the test for model and electricity performance of products, if need the power connector keep long term contact, it must be made insurance according to the standard of design and technology documents, and could not loosing the lock device of power connector when make the insurance.
