FR4 PCB board with Laser drilling for Heavy Copper PCB 0.1mm holes

Introduction:

Laser Stencil Heavy Copper PCB means a laser cut SMT stencil built on 0.12mm stainless steel foil with 598 mm x 598mm length and width. It's fabricated per IPC 7525A using supplied Gerber data, squeegee area locating in the center. 4 sides of edges are through holes to suit for the SMT machine. It's packed with KK carton (hard card) and usually 2 stencils are packed for shipment.

Advantage:

a. The data file is used directly to produce and reduce the error rate;
b. The opening position accuracy of SMT template is very high: the whole process error is4
m;
c. The opening of SMT template has geometric figure, which is advantageous to the printing and

forming of tin paste;
d. ISO9000 certified manufacturing factory;
e. 12 hours quotation;
f. Quick Lead time: 1-2 days;
g. No MOQ, low cost for prototypes and small runs quantity.

Parameter and data sheet

• Led Pcb With 3Wmk

• FR4 2 Layer PCB 1.2mm Immersion Gold

• 2 Layers 2.0MM PCB 1 OZ PCB

• Fr4 Rigid 1.6mm Single Layers Fiberglass Epoxy PCB

• Rigid-Flex PCB Fast-Turn Prototype And Mass Poduction

• FR4 With Deep Control SLOT Suppliers

• Feedback