Active Member
|
[China]
Address: 4113-4116# A Area, HSST PARK, BAO'AN District, Shenzhen, China
Contact name:Wendy
Abis Circuits Co., Ltd. |
|
|
Multilayer Flex Rigid PCB Polyimide/PI+FR4 Material PCB Board China PCB Fabrication
Abis Circuits Co., Ltd is a professional PCB manufacturer which was established in Oct 2006 and focuses on double side, Multilayer, and HDI PCB production.
Our Mission:
PCBs for demanding customers, on time with zero defects, are
produced sustainably at the lowest total cost. Manufacturing many
different types of PCBs in smaller series (High-mix, Low-volume)
involves constantly adjusting, adapting, and problem-solving.
Rigid PCB Capacity:
| Max. No. of Layers | 20 |
| Max. Board Size | 860*610mm |
| Board Thickness | 0.2-6.0mm |
| Copper Thickness | 0.5OZ-6OZ |
| Material | Various |
| Surface Finish | Various |
| Soldermask | Various |
| Minimum Soldermask Thickness | 0.025mm |
| Minimun Soldermask BridgeDam | 0.15mm |
| Minimum Soldermask Clearance | 0.075mm |
| Peelable Colours | Blue |
| Peelable Minimum Feature | 0.5mm |
| Peelable Maximum Tented Hole | 3.0mm |
| Scoring Angle | 30 Degrees |
| Min. Remaining Thickness | 0.3mm |
| Min. Distance to copper (From the center of the scoring line) | 0.5mm |
| Min. Track | 0.1mm |
| Min.Gap(TrackTrack,TrackPad,PadPad) | 0.1mm |
| NPTH Min. Drill Size | 0.2mm |
| Plated Drill Size | ± 0.075mm |
| Non-Plated Drill Size | ± 0.05mm |
| Drill Location Tolerance | ± 0.05mm |
| OutlineRouted Slots | ± 0.1mm |
| Line Width/Spacing | ±10% |
| Board Thickness | ±10% |
| Warp and Twist | 0.05% |
| Scoring/V-Cut | ± 5 degrees |
| Scoring Positional Tolerance | ± 0.1mm |
| Aspect Ratio | 10:01 |
Flex PCB Capacity:
| Number of layers | 1 – 8L |
| Technology highlights | Mainly polyimide materials, flex PCBs are necessary when the motion of the PCB is needed, when 3-D interconnections are necessary (i.e. replacing cables and connectors), or when these are both combined due to limited available space. |
| Materials | Polyimide, Polyester |
| Profile method | Laser cutting, punching, rout |
| Copper weights (finished) | 18μm – 70μm |
| Minimum track and gap | 0.075mm / 0.075mm |
| PCB thickness | 0.05mm – 0.80mm |
| Maxmimum dimensions | 450mm x 610mm |
| Surface finishes available | OSP, ENIG, Immersion tin, Electrolytic gold, Gold fingers |
| Minimum mechanical drill | 0.15mm |
Workshop:
Exhibition show:
Shipping Method and Payment terms:
1. By DHL, UPS, FedEx, and TNT using clients' accounts.
2. We suggest you use our DHL, UPS, FedEx, and TNT forwarder.
3. By EMS (Usually for Russia Clients), the price is high.
4. By sea for mass quantity according to customer's requirement.
5. By customer's Forwarder
6. By Paypal, T/T, West Union, etc.
FAQ:
Q1: When can I get the quotation?
A: We usually quote 1 hour after we get your inquiry. If you are very
urgent, please call us or tell us in your email.
Q2: Can you provide free samples for me?
A: Free samples depend on your order quantity.
Q3: I am a small wholesaler, do you accept small orders?
A: It's no problem. If you're a small wholesaler, we would like to
grow up with you together.
Q4: How many days will the sample be finished? And how about the mass
production?
A: Generally 2-3 days for sample making. The lead time of mass
production will depend on the order quantity and the season you
place the order.
Q5: If I order a big quantity, what's the good price?
A: Please send the details inquiry to us, such as the Item Number,
Quantity for each item, Quality request, Logo, Payment Terms,
Transport method, Discharge place, etc. We will make an accurate
quotation for you as soon as possible.
