Home Companies SUNSHINE RFID Technology Co.,Limited

Four Port UHF RFID Reader Module Development Board With IMPINJ R2000 Sensor

Active Member

Contact Us

[China]

Address: 6th floor,West Tower,BLDG 2,Minqi Science and Technology Park, No.1 Pingshan Road, Xili Street, Nanshan District, Shenzhen,China.

Contact name:Sheila chan

SUNSHINE RFID Technology Co.,Limited

Four Port UHF RFID Reader Module Development Board With IMPINJ R2000 Sensor

Country/Region	china
City & Province	shenzhen guangdong
Categories	Access Control System

Product Details

Four Port UHF RFID Reader Module Development Board With IMPINJ R2000 Sensor for warehousing

Product Advantages

Remarkable performance in intensive taps reading can attain a taps identification rate of 400tags/s.
Provide the most comprehensive functions SDK and ports, easy to integrate RFID software.
Adopted integrating RF chip, module performance is more stable, and more suitable for harsh application environment.
The use of carrier wave cancellation technology makes the tag reading more accurate and the reading scope wider.
The smallest module volume in the same field and supply power of 3.7V, it is especially suitable for handsets and other mobile devices.
Enhance noise suppression for reliable data capture.
High precision return signal strength (RSSI).

Employed IMPINJ R2000 RF Chips, up to 110dbm receiving sensitivity and the highest performance in this field makes this module more suitable for harsh application environment.
High stability and reliability, 60*24 hours high temperature of workstation, can work stably and continuously.
Remarkable performance with 8dbi RF antenna, can achieve a reading distance over 10m per single tag.

Product Electrical Parameters

NO.	Name	Reference
1	Working Voltage	DC 5.0V
2	Working Current	≤1.5A
3	Standby Current	≤50mA
4	Sleep Current	≤1mA
5	Working Temperature	-25 -- +65℃
6	Working Humidity	≤95%(+25℃)
7	Storage Temperature	-40 -- +80℃
8	Tag Protocol	EPCglobal UHF Class 1 Gen 2 / ISO 18000-6C
9	Working Frequency	840～960 MHz
10	Supporting Working Areas	China 1, China 2 US, Canada and other regions following U.S. FCC Europe and other regions following ETSI EN 302 208 with & without LBT regulations Japan Korea Malaysia Taiwan
11	RF IC	Impinj R2000
12	Output Power	Software adjustable, step interval 1.0dB, maximum 30dBm
13	Output Power Flatness	±0.2 dBm
14	Receiving Sensitivity	≤-110 dBm
15	RF Port Standing Wave	≤1.5
16	Maximum Reading Distance	≥10m (With 8dBi antenna/Relate to tags type, transmitted power and application environment)
17	Multi-tag Reading	≥400 tags/s
18	Antenna Interface Amount	Four (MMCX)
19	Interface Communication Rate	115200 bps
20	Working Temprature Detection	support
21	Intensive Read/Write Mode DRM	support
22	Antenna Connection Protection	support
23	RSSI	support
24	LED	Red light (power indicator )
25	Product Cooling Way	Aluminum metal case as cooling fin for the module
26	Dimension	76.440.37.0MM

Interface Definition

Pin NO.	Name	Type	Description
1	UART_TX	I/O	TTL UART Transmit
2	UART_RX	I/O	TTL UART Receive
3	GPIO3	I/O	Output
4	GPIO2	I/O	Output
5	GPIO1	I/O	Output
6	PWREN_MODULE	I/O	When Pull Down This Pin to Ground,The Module Enter Sleeping Mode.
7	GND	Ground	Ground
8	GND	Ground	Ground
9	VCC	Power	DC 5V Power Input.
10	VCC	Power	DC 5V Power Input.

Our Service

1. OEM Manufacturing welcome: Product, Package...
2. Sample order
3. We will reply you for your inquiry in 24 hours.
4. after sending, we will track the products for you once every two days, until you get the products. When you got the
goods, test them, and give me a feedback.If you have any questions about the problem, contact with us, we will offer
the solve way for you.