Active Member
|
[China]
Address: 6th floor,West Tower,BLDG 2,Minqi Science and Technology Park, No.1 Pingshan Road, Xili Street, Nanshan District, Shenzhen,China.
Contact name:Sheila chan
SUNSHINE RFID Technology Co.,Limited |
|
|
Warehouse Management UHF RFID Reader With Impinj R2000 module
Product Description
The maximum power output of this module is 30dBm, with 8dbi antenna, which can realize a efficient reading/writing distance of 8m or above, and over 400tags/s for tags identification. Meanwhile, the compact design makes this module smaller, coupled with the low working voltage of 3.7V, the module is particularly suitable for application in a device such as a handset.
Application
Access Control and Time Attendance
Automatic Vehicle ID and Access Control
Warehousing rfid management
Asset Management
Container tracking and Logistics
Personal Identification and tracking
Waste management
Animal Identification Pets, Live Stock
Food Logistics and ID
UHF RFID IN Health care
Mining and fuel Auto-ID
Public transport
Retail
Product counterfeit inspection
Clothes
Product Electrical Parameters
| NO. | Name | Parameters |
| 1 | Working Voltage | DC 3.7～5V |
| 2 | Working Current | 1.5A |
| 3 | Standby Current | ≤50mA |
| 4 | Sleep Current | ≤1mA |
| 5 | Working Temperature | -25～+65℃ |
| 6 | Working Humidity | ≤95%(+25℃) |
| 7 | Storage Temperature | -40～+80℃ |
| 8 | Tag Protocol | EPCglobal UHF Class 1 Gen 2 / ISO 18000-6C |
| 9 | Working Frequency | 840～960 MHz |
| 10 | Supporting Working | China 1,China 2 |
| 11 | RF IC | Impinj R2000 |
| 12 | Output Power | Software adjustable, step interval 1.0dB, maximum 30dBm |
| 13 | Output Power Flatness | ±0.2dBm |
| 14 | Receiving Sensitivity | -82dBm |
| 15 | RF Port Standing | ≤1.5 |
| 16 | Reading Distance | ≥10m(With 8dBi antenna/Relate to tags type, transmitted power and application environment) |
| 17 | Multi-tag Reading | ≥400 tags/s |
| 18 | Antenna Interface | one(MMCX) |
| 19 | Interface Communication Rate | 115200bps |
| 20 | Working Temprature Detection | support |
| 21 | Intensive Read/Write | support |
| 22 | Antenna Connection | support |
| 23 | RSSI | support |
| 24 | LED | Red light (power indicator ) |
| 25 | Product Cooling Way | Aluminum metal case as cooling fin for the module |
| 26 | Dimension | 56.5*36.0*7.8 MM |
Interface Definition
| Pin NO. | Name | Type | Description |
| 1 | UART_TX | I/O | TTL UART Transmit |
| 2 | UART_RX | I/O | TTL UART Receive |
| 3 | GPIO3 | I/O | Output |
| 4 | GPIO2 | I/O | Output |
| 5 | GPIO1 | I/O | Output |
| 6 | PWREN_MODULE | I/O | When Pull Down This Pin to Ground,The Module Enter Sleeping Mode. |
| 7 | GND | Ground | Ground |
| 8 | |||
| 9 | VCC | Power | DC 3.7V to 5V Power Input. |
| 10 |
Remark:
The M2210 module developed a corresponding development board kit,
coupled with the rapid technology of ultra-high frequency
demonstration software DEMO, customers can easily and quickly
familiar with the use of M2210 module, and related hardware and
software development, shorten the development cycle.
The M2210 development board has a wealth of peripheral interfaces:
RS-232, RS485, USB, network interface, wireless WIFI, Wiegand.
Customers can choose according to the actual use of the situation.
Development board kit includes: M2210 + development board 1 set,
12V power adapter 1, 1 interface cable. Development board size:
22.0 × 12.0 × 3.5CM.
Note: Development board related configuration to be purchased
separately.
Q1. What is your terms of packing?
A: Generally, we pack our goods in neutral white boxes and brown
cartons. If you have legally registered patent,
we can pack the goods in your branded boxes after getting your
authorization letters.
Q2. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We'll show you the
photos of the products and packages
before you pay the balance.
Q3. What is your terms of delivery?
A: EXW, FOB, CFR, CIF
Q4. How about your delivery time?
A: Generally, it will take 3-7 days after receiving your advance
payment. The specific delivery time depends
on the items and the quantity of your order.
Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings.
Q6. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but
the customers have to pay the sample cost and
the courier cost.
Q7. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery
Q8: How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our
customers benefit ;
2. We respect every customer as our friend and we sincerely do
business and make friends with them,
no matter where they come from.
