|
[China]
Trade Verify
Address: No. 5-37, Fengxi 2nd Road, Hailong Street, Liwan District, Guangzhou, China
Contact name:Buffy
Guangdong Bunge Building Material Industrial Co., Ltd |
|
Verified Suppliers
|
|
|
Demountable Collapsible Sound Insulation Removable Partition Walls
for Conference Hall
Collapsible movable partition walls details
The collapsible movable partition walls series is the highest specification range of fully operable, individual-panel acoustic partitions system.
Acoustic insulation of up to 56dB noise reduction is achieved with a combination of operable top and bottom seals, high performance multiple in fill's and a panel assembly design that allows an acoustic break between the frame and outer layer.
The vertical channels of each panel incorporate polymer inserts that facilitate an acoustic seal when the panels are set out as a wall. Collapsible movable partition walls panels are produced in three thickness, 65 mm, 85 mm and 100 mm, depending on acoustic rating (from 37dB–56dB).
Technical information
| Model | BG-65 series | BG-85 series | BG-100 series |
| Suspension system | Aluminum hanging | Aluminum hanging | Aluminum hanging |
| Basic thickness | 65mm | 85mm | 100mm |
| Total thickness | 65/75/85/95mm | 80/90/100/110mm | 100/120/130mm |
| Max height | Up to 3800mm | Up to 4500mm | Up to 6500mm |
| Width | 600-1230mm | 600-1230mm | 800-1230mm |
| Floor/ceiling sealing strength | Telescopic aluminum tube with rubber strip | ||
| Side walls sealing strength | Double seal tape | ||
| Sound insulation level | 26dB-30dB | 28dB-34dB | 32-40dB |
| Panel Suspension | Top hanging system without the need for a floor track. |
| Panel Width | Each panel 600mm-1200mm. |
| Track | Aluminum Or Steel Track |
| Roller on panel | Single or Double Roller |
| Panel Frames | Heavy-duty steel-gusseted aluminum inner frames reinforced with full height. |
| Top and bottom seals | Top and bottom pressure retractable seals ensure effortless moved and locked. |
| Module | 700mm - 1200mm maximum. |
| Panel stacking | Numerous panel stacking options for complete flexibility. |
| Panel Surface | MDF,Plywood, woven fabric, Leather,Natural wood veneer, Melamine,Wood moldings, etc. |
Collapsible movable partition walls advantages
Engineering transparency, quality assurance
1. Because it is a factory production,information: The transparency of high compartments is high. There are templates and instructions for each material, no shoddy material will appear;
2. All of the collapsible movable partition walls passed the test;
3. Because it is an assembly, it is easy to see the effect on the spot.
Product environmental protection
1. There is no damage to the ground. Overhead rails only need to install the rails on the floor or on the load beam or grid; there is no track on the floor.
2. It can perform surface fluorocarbon spraying. Unique aluminum alloy profiles: rail and partition wall aluminum alloy 6063-T6 GB profiles.
3. Heavy-duty, wear-resistant suspension wheel: The life of the suspension wheel is more than 100,000 times.
4. It is not easy to swing and can be accepted 4 Strong stability: The partition is fully stable after being pulled out of the lock. Can withstand 50-100 kg of impact force; up to 15 meters.
Soundproofing and fire prevention
1. There are four sealing strips on the upper and lower sides of the door, and two sealing strips on the left and right sides. Maximum sound insulation up to 5 Sound and environmental protection: good sound insulation. The coefficient of the compartment can reach 60 decibels; and use environmental protection data to process.
2. Efficient fire protection, use of high-efficiency fire protection data, fire rating A.
