Guangdong Bunge Building Material Industrial Co., Ltd |
Verified Suppliers
|
|
Specification:
Acoustic partition begin each new project by considering the customer's needs. Whatever your requirement we can help to resolve your space management issues. We can assist architects, interior designers, and end users in the innovative use of movable walls to maximise use of space, whether it be conferencing, leisure, educational, healthcare, religious institutions, commercial or domestic situations.
In commercial applications the use of sliding partitions, folding partitions or movable walls can maximise your potential for increased revenue by increasing your available space in a fully flexible way. Our products are designed to make the best possible use of the space you have.
Top hung with no floor track.
Scissor-jack operating mechanism.
Available with virtually any surface finish.
Ideal for conference centres, hotels, offices & schools.
Angled, glazed, corner or junction panels for maximum flexibility.
Single or double point suspension for versatile stacking options.
Panels with hinged pass door, single or double leaf inset pass door
panels for access through.
Full maintenance contracts available.
Feature:
1. Efficient fire prevention: the material of the movable partition is made of fireproof material and has good fireproof performance;
2.Heat insulation: according to different occupancy rates, the space can be divided into small spaces, and good thermal insulation performance;
3.Sound insulation and environmental protection: its sound insulation coefficient can reach 53dB, sound insulation effect is good;
4.Stable and safe: stable and reliable, not easy to swing, shake;
5.No rail suspension: no need to install the ground rail on the floor, its track is installed on the ceiling.
Installing:
1. Remember that the track should be loose enough above all the brackets to ensure that the track is paused;
2. After the track of the movable partition is laid, tighten the connection of all the tracks and adjust the horizontal level of the track correctly. The direction of the track installation must also be horizontal and straight;
3. When the track facility is installed, the sound insulation and mineral wool are the necessary plates for installation;
4. Before closing the movable partition, the height of the carrier must be adjusted, and the straight angle of the track should be checked to make the track partition work well;
5. Check all active partitions, whether they are all vertical, if there is no damage, you can enter the edge of the aluminum frame of the rubber seal vertically and not bend;
If the orbital direction is horizontal, but the active partition is suspended, then the carrier height must be adjusted.
Introduction:
The acoustic partition wall is our individual panel partition
system offering an acoustic insulation rating of up to 53 dB.
Ideally suited for high specification applications due to the sheer
flexibility, numerous stacking arrangements available and the
impressive acoustic qualities this system offers.
The panels are operated by means of an internal scissor-jack mechanism and move effortlessly along an aluminium head track, when closed they form a secure fixed wall.
Technical Information:
Series | BG65 | BG85 | BG100 |
Panel suspension | Top hung only | Top hung only | Top hung only |
Panel thickness | 65 mm | 85 mm | 100 mm |
Max height | 4000 mm | 6000 mm | 18000 mm |
Panel width | 500-1200 mm | 500-1200 mm | 500-1200 mm |
Face material | 9 mm | 9 mm | 12 mm |
Pass doors | Single door or Double door | ||
Sound insulation | 20-32dB Rw | 28-36dB Rw | 32-50dB Rw |
Finish Material | Plywood, MDF, Laminate, Melamine, Gypsum board, Fabric, Leather, Insulation board, Fireproof board, Wall paper, Vinyl, Painting, etc. |
Our service:
1. Profession--We have professional sales staff. Any questions will be replied within 24 hours.
2. Price--Because we are factory , so we can provide higher quality
and lower price products.
3 . Service--Easy and convenient to transport,we promise timely
delivery date, and good after-sale service.
4. Team--We have our own engineering department, according to your
request for your tailor-made for your product.