Guangdong Bunge Building Material Industrial Co., Ltd |
Verified Suppliers
|
|
Acoustic Folding Soundproof Office Partition Walls
Specification:
The effective division of space some times requires utmost
flexibility.Whether the requirement is to divider a teaching
area,temporarily partition a conference suite,or simply create
extra rooms out of one large space, the answer is movable walls
sliding folding partitions. Bunge operable walls, the products also
include,hinged partitions and concertina folding partitions along
with a range of glass movable walls and industrial doors. Bunge
provides unrivalled experience in the design and manufacture of
space utilization products.
Feature:
(1)Individual panels that can be stored away for maximum space
usage.
(2)Operable top and bottom seals for effortless operation.
(3)Aluminium frame construction for enhanced acoustics.
(4)The system offers various levels of sound reduction.
(5)Unique track and carrier system ensuring quiet and easy
operation.
(6)Numerous panel stacking options for completer flexibility.
(7)Top hanging and no floor track.
(8)Expensive range of surface finishes can be available.
Usage:
(1)Constructing location: keep dry, the temperature should be
higher than 10'C, the widest humidity range should confined to
40%-60% after construction 24 hours before constructing, the
location should reach the standards as above.
(2)Acoustic panels: for the acoustic panels accommodated to the
circumstance of constructing, please place the panels in the
constructing location for 48 hours, check up the type,
specification and amount of the panels before constructing.
(3)Keels: fix the keels on the wall flatly according to the plan,
the keels should be flat, slick, no rust, no metamorphosis; the
wall must be construct according to the standards, the keels
suitable install with acoustic panels, leave smaller than 500mm
space between each wooden keel(smaller than 600mm of light steel
keel), install the keels vertically with acoustic panels.
Technical Information:
Series | BG65 | BG85 | BG100 |
Panel suspension | Top hung only | Top hung only | Top hung only |
Panel thickness | 65 mm | 85 mm | 100 mm |
Max height | 4000 mm | 6000 mm | 18000 mm |
Panel width | 500-1200 mm | 500-1200 mm | 500-1200 mm |
Face material | 9 mm | 9 mm | 12 mm |
Pass doors | Single door or Double door | ||
Sound insulation | 20-32dB Rw | 28-36dB Rw | 32-50dB Rw |
Finish Material | Plywood, MDF, Laminate, Melamine, Gypsum board, Fabric, Leather, Insulation board, Fireproof board, Wall paper, Vinyl, Painting, etc. |
Advantage:
Long-term use: with more economy and higher decorative, beautiful
and safe, will not scratch the skin.
Cost savings: installation does not affect the construction of
smallpox and the ground.
Various forms: optional with a variety of occasions partition wall,
can be customized according to customer requirements.
Easy combination: in the re-assembly can make full use of building
materials.
Material environmental protection: selection of high-quality
melamine particleboard, sound insulation and sealing a good variety
of accessories a variety of options.
Accessories details:
Panel Surface Finish:The panel surface will be as per the clients requirement finished either in Sliwal factory – China or by others . The normal finish such as:laminate,veneer,melamine,fabric etc.
Seals: vinyl seal of butane rubber will be used as top and bottom and as well as closure seals for the operable wall system.Retractable seal drop will be 23 mm.
Aluminium trim: The panel trims will be standard series with exposed Aluminium trims of 10mm thickness finished in 6063 - T5 Anodized Aluminium shall be used.