Hotel Wooden Partition Wall / Movable Room Dividers Top Ceiling System

Movable Room Dividers Top Ceiling Wooden Partition Wall

Specification:
 

Wooden movable wall is our top of the range operable walls. The system offers several layouts and stacking arrangements to create many useful areas within the working space.

Wooden movable walls are solid acoustic sliding partitions available in three varying thicknesses and laboratory tested sound rating up to Rw 53dB. This system is top hung. Each panel is individually supported by a track system mounted on the ceiling. No floor track is required.

To create the seal, each panel has interlocking vertical profiles and retractable rubber seals. A handle inserted into the vertical edge of each panel operates the retractable seals. One half turn of the handle operates a mechanism inside the panel that moves the seal against the floor and against the track. In most cases the last panel has a telescopic leading edge with a rubber seal operated with a handle inserted into the face of the panel. This panel will close and seal the whole system. An option is also available for semi electric seal operation.

Face finishes available as standard are a wide choice of plain or wood grain melamine, real wood veneers, vinyl’s or spray painted. Doors can be inset into all movable office walls and can meet Disabled Door Access regulations if required. Glazing can also be incorporated into the panels.

Application:
 

Ease of operation, acoustic performance and pleasing aesthetics are combined in it to create movable walls that maximize spatial versatility in offices, conference and meeting rooms, training areas, educational establishments, hotels and banqueting suites.

  
Advantage:
 

Alternatively, top hung with/without floor track.

Face operated salopettes bolts lock wall securely in position.

Continuous contact sweep seals minimize sound transfer.

Single wing or bi-parting configurations.

Leading element is full height pass door.

Optional vision panels.

Parking centrally or to side of line of track.

Panel finishes include vinyl, veneer, melamine laminate, a magnetic dry wipe.

Accessories information:

Track: The tracks are made from extruded 6063 - T5 anodized aluminium. The track housing shall utilize grooves and interlocking steel pins for positive alignment of adjacent track sections, and shall be reinforced overhead by drop rod brackets. Aluminum track housing shall include an integral nut slot to accept a hardened square nut for attaching each drop rod bracket to the top of the track.

Panels:The Panels will be made from 12mm MDF boards and shall be 100mm thick and 1230mm maximum width, made to the appropriate acoustic rating and structural backing and mounted in full perimeter extruded aluminium frames with interlocking corner construction .The panel faces shall be finished with selected material.

Panel Surface Finish:The panel surface will be as per the clients requirement finished either in Sliwal factory – China or by others . The normal finish such as:laminate,veneer,melamine,fabric etc.
Seals: vinyl seal of butane rubber will be used as top and bottom and as well as closure seals for the operable wall system.Retractable seal drop will be 23 mm.

 
Technical Information:

Our service:
 

Supply you excellent design proposal.
Supply you prompt and competitive price.
Supply you strict quality-compliance and punctual delivery.
Organize the shipment for you.
Reliable after service: timely service and efficient response.