Guangdong Bunge Building Material Industrial Co., Ltd |
Verified Suppliers
|
|
China Manufacturer Aluminium High Quality Folding Wooden Partition
For Convention & Exhibition Centre
Recovering Partitions
When it's time to refresh the look of your partitions, Bunge
service technicians can also recover the faces. They are also
trained to remove and re-install the panel hardware so that the
face material is properly installed under the trim pieces. If the
hardware is not removed, the face material may be butted against
the trim, leaving the raw edges to become loose over time.
Whether the faces have become worn, stained, or torn overtime, or
if you just need to update your décor, Bunge can help. We offer a
large selection of vinyl, fabric, and carpet colors and have access
to a wide array of finishes
Technical support
Most of our Bunge products adopt adopted the advance partition
technology of USA , Germany and Denmark . We have professional
staff with more than 10 years of experience in design, production
and installation.
Applications :
1. Change the room space freely dividly.
2. Heavy Track loading capacity make sure the safety of Partition .
3. Precise welding between separate rail can eliminate repairing
and maintenance rate .
4. Partition retract and push easily for one people to handle the
operating work .
5. Wide application: can be used in Office place , commercial place
, exhibition place , Hospital place .
Specifications:
Technical Parameter for Partition Panel | Panel Width | 500~1230mm |
Panel height | 2000~6000mm | |
Sound proof | 36~42db | |
Operation | Manual | |
Frame | Aluminum | |
Vertical profile | Anodised aluminum profiles with integrated magnetic strip and sealing edges on the inside | |
Finish options | Fabric, veneer, HPL melamine, vinyl, carpet, customers own material, Bare finish | |
Base options | Plywood, Gypsum, steel, MDF | |
Max width | Unlimited | |
Panel weight | 25-40kg/sq | |
Pass door selection | door | Single dor or double door |
Seals | Top | Manual |
bottom | Manual |
Operation :
Partitions shall be top supported, manually operated panels stacked
in an area nominated in the plans. When closed, the operable wall
shall provide a complete sound retardant barrier . No floor track
shall be used .
Seals :
Vinyl seal of butane rubber will be used as top and bottom and as
well as closure seals for the operable wall system . Retractable
seal drop will be 23mm
Operation :
Partitions shall be top supported, manually operated panels stacked
in an area nominated in the plans. When closed, the operable wall
shall provide a complete sound retardant barrier. No floor track
shall be used.
Track :
The tracks are made from extruded 6063 – T6 anodized aluminum . The
track housing shall utilize grooves and interlocking steel pins for
positive alignment of adjacent track sections , and shall be
reinforced overhead by drop rod brackets . Aluminum track housing
shall include an integral nut slot to accept a hardened square nut
for attaching each drop rod bracket to the top of the track .
Trolley :
BUNGE Centre / Side / Remote stacking system with a Two wheeled
nylon trolley made with the base Material of POM 45 tempered steel
shall be used as per approved stacking method .